View IFT /PQ / REOI / RFP / PPS Notice Details
Ministry : Ministry of Education Division : Secondary and Higher Education Division
Organization : National Curriculum and textbook Board (NCTB) Procuring Entity Name : Member (Textbook), NCTB
Procuring Entity Code : Procuring Entity District : Dhaka
Procurement Nature : Goods Procurement Type : NCT
Event Type : Invitation for : Tender - Single Lot
Invitation Reference No. : 37.06.0000.304.07.328.24/2028 Tender/Proposal Status :
App ID : 203042 Tender/Proposal ID : 1026840
Key Information and Funding Information :
Procurement Method : Open Tendering Method (OTM) Budget Type : Revenue
Source of Funds : Government
Particular Information :
Project Code : Not applicable Project Name : Not applicable
Tender/Proposal Package No. and Description : GD.28.PRI.1_3.009
For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes 1 , 2 & 3 to be distributed free of cost for the Academic Year 2025
Category : Various types of printed matter and articles for printing; Printing, publishing and related services;Printed books, brochures and leaflets;Printed books;Publications;Directories;Leaflets;Brochures;Booklets;Newspapers, journals, periodicals and magazines;Newspapers;Postcards, greeting cards and other printed matter;Postcards;Greeting cards;Stamps, cheque forms, banknotes, stock certificates, trade advertising material, catalogues and manuals;Stamps;Stamp-impressed paper;Banknotes;Cheque forms;Security-type printed matter;Trade-advertising material, commercial catalogues and manuals;Manuals;Printing plates or cylinders or other media for use in printing;Offset plates;Dry-etching equipment;Paper or paperboard registers, account books, binders, forms and other articles of printed stationery;Paper or paperboard registers;Forms;Exercise books;Albums for samples;Binders and related accessories;Printed stationery except forms;Miscellaneous printed matter;Car-tax discs;Driving licences;ID cards;Permits;Entrance cards;Bespoke printed matter;Tickets;Printing services;Printing services for books;Printing services for stationery;Printing services for security printed matter;Printing services for forms;Printing services for tickets;Printing services for calendars;Printing services for timetables;Newspaper printing services;Printing services for posters;Services related to printing;Print finishing services;Composition services;Printing and delivery services;Printing and distribution services;Publishing services;Bookbinding and finishing services;Subscription services
Scheduled Tender/Proposal Publication
Date and Time :
17-Oct-2024 21:00 Tender/Proposal Document last selling /
downloading Date and Time :
27-Oct-2024 17:00
Pre - Tender/Proposal meeting Start
Date and Time :
17-Oct-2024 22:00 Pre - Tender/Proposal meeting End
Date and Time :
24-Oct-2024 17:00
Tender/Proposal Closing
Date and Time :
28-Oct-2024 14:00 Tender/Proposal Opening
Date and Time :
28-Oct-2024 14:00
Last Date and Time for Tender/Proposal Security
Submission :
28-Oct-2024 13:00    
Information for Tenderer/Consultant :
Eligibility of Tenderer :

As Per TDS

Brief Description of Goods and Related Service :

For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes 1 , 2 & 3 to be distributed free of cost for the Academic Year 2025.

Evaluation Type : Lot wise
Document Available : Package wise
Document Fees : Package wise
Tender/Proposal Document Price (In BDT) : 4000
Mode of Payment :
Tender/Proposal Security Valid Up to : 25-Mar-2025
Tender/Proposal Valid Up to : 25-Feb-2025
Lot No. Identification of Lot Location Tender/Proposal security
(Amount in BDT)
Tentative Start Date Tentative Completion Date
009 For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes 1 , 2 & 3 to be distributed free of cost for the Academic Year 2025 As per delivery schedule 690000 08-Dec-2024 31-Dec-2024
Procuring Entity Details:
Name of Official Inviting Tender/Proposal : Riad Choudhury Designation of Official Inviting Tender/Proposal : Member (Textbook)
Address of Official Inviting Tender/Proposal :
Address: 69-70, Motijheel, C/A, Dhaka-1000
City: Dhaka
Thana: Motijheel
District: Dhaka - 1000
Country: Bangladesh
Contact details of Official Inviting Tender/Proposal :
Phone No: 02-9550805
Fax No:
The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs
Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.
Documents
Amendment / Corrigendum Detail
 Amendment / Corrigendum No. :  1 
Amendment / Corrigendum Text :

Update TDS

Field Name Old Value New Value
Eligibility of Consultant

As Per TDS

As Per TDS

TDS/PDS--C. Qualification Criteria--

(a) The minimum of years of general experience of the Tenderer in the supply of Goods and related services as Supplier shall be 02 (Two) years. Years counting backward from the date of publication of IFT in the e-GP System.
 

(b) The minimum specific experience as Supplier in supply of similar Goods of at least 02 (Two) contract(s) successfully completed within the last 05 (Five) years, each with a value of at least Tk.18980000
 

Years counting backward from the date of publication of IFT in the e-GP System.

For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment chalan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/chalan submission is not required.
ii) In case of NCTB’s work experience, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification Of Award) and will make sure whether the contract was successfully completed or not.

(c) The minimum supply and/or production capacity of Goods is/ are:

i. The Tenderer must have own sufficient machineries for Cover printing, Text printing of Primary level Textbooks. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine  Size of Machine Color of Machine Capacity
(Per day)
1 Sheet Machine (Cover Printing) 23"×36"/above Bi color/ above color  
2 Web Machine  20"×30"  4 color 600 ream
3 Sheet Machine 20"×30"/above 4 color 80 ream
4  Auto Glue Binding Machine     3000 books Per Clam Per day
5 Cutting Machine      
6 U.V (Ultra Varnish)      
7 Bundle Machine      

 Tenderer is not considered without having the above machineries.

ii. The minimum production capacity of printing and Auto binding machineries of textbooks shall be 100% in quantity of goods of proposed contract within 45 days and it will be verified before final evaluation.

Address of the printing and binding section of the press must be mentioned in the tender document and the printing and binding works must be done in that premises.

iii. A Printing Unit shall have a set of printing machineries along with all equipment’s (binding, UV lamination, cutting, bundling, etc.) to furnish a set of complete Textbooks in the same premises of minimum 1000 sqft. Multiple Printing Units are acceptable considering the mentioned criteria. Address of all Printing Units must be mentioned in the tender where the printing and binding works must be done in that/those premises. Within the contract period Printers must not use this place for any other printing works.

iv. Physical facilities of the tenderer shall be inspected by the TEC or NCTB’s inspection committee. At the time of post evaluation, tenderer must have to ensure that each of the printing machines, Auto Glue binding machines, U.V (Ultra Varnish) laminating machines and cutting machines are working properly and in good condition. Printing and binding capacity of the tenderer would be calculated only on the basis of the physical inspection report of the said committee.

Note: Printing & Binding Capacity Determination:
For smooth production (printing, binding & supplying activities) in Primary and Secondary level, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB.

N.B: At the time of tender evaluation occupied machine (by the concern TEC) shall not be considered for another tender (Lots).

Printing Status:
If the Procuring Entity (PE) understands/assumes that the printer is failed or is not able to supply the Textbooks within the stipulated time/period as per contract, the PE will take necessary action/arrangement against printers in order to ensure printing and supply of the Textbooks in whole or part of the awarded quantity from any other sources as per the provisions of PPR and PPA. In that case the procuring entity may not be receiving the rest quantity of the Textbook from the suppliers/printers.

(a) The minimum of years of general experience of the Tenderer in the supply of Goods and related services as Supplier shall be 02 (Two) years. Years counting backward from the date of publication of IFT in the e-GP System.
 

(b) The minimum specific experience as Supplier in supply of similar Goods of at least 02 (Two) contract(s) successfully completed within the last 05 (Five) years, each with a value of at least Tk.18980000
 

Years counting backward from the date of publication of IFT in the e-GP System.

For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment chalan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/chalan submission is not required.
ii) In case of NCTB’s work experience, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification Of Award) and will make sure whether the contract was successfully completed or not.

(c) The minimum supply and/or production capacity of Goods is/ are:

i. The Tenderer must have own sufficient machineries for Cover printing, Text printing of Primary level Textbooks. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine  Size of Machine Color of Machine Capacity
(Per day)
1 Sheet Machine (Cover Printing) 23"×36"/above Bi color/ above color  
2 Web Machine  20"×30"  4 color 600 ream
3 Sheet Machine 20"×30"/above 4 color 80 ream
4  Auto Glue Binding Machine     3000 books Per Clam Per day
5 Cutting Machine      
6 U.V (Ultra Varnish)      
7 Bundle Machine      

 Tenderer is not considered without having the above machineries.

ii. The minimum production capacity of printing and Auto binding machineries of textbooks shall be 100% in quantity of goods of proposed contract within 22 days and it will be verified before final evaluation.

Address of the printing and binding section of the press must be mentioned in the tender document and the printing and binding works must be done in that premises.

iii. A Printing Unit shall have a set of printing machineries along with all equipment’s (binding, UV lamination, cutting, bundling, etc.) to furnish a set of complete Textbooks in the same premises of minimum 1000 sqft. Multiple Printing Units are acceptable considering the mentioned criteria. Address of all Printing Units must be mentioned in the tender where the printing and binding works must be done in that/those premises. Within the contract period Printers must not use this place for any other printing works.

iv. Physical facilities of the tenderer shall be inspected by the TEC or NCTB’s inspection committee. At the time of post evaluation, tenderer must have to ensure that each of the printing machines, Auto Glue binding machines, U.V (Ultra Varnish) laminating machines and cutting machines are working properly and in good condition. Printing and binding capacity of the tenderer would be calculated only on the basis of the physical inspection report of the said committee.

Note: Printing & Binding Capacity Determination:
For smooth production (printing, binding & supplying activities) in Primary and Secondary level, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB.

N.B: At the time of tender evaluation occupied machine (by the concern TEC) shall not be considered for another tender (Lots).

Printing Status:
If the Procuring Entity (PE) understands/assumes that the printer is failed or is not able to supply the Textbooks within the stipulated time/period as per contract, the PE will take necessary action/arrangement against printers in order to ensure printing and supply of the Textbooks in whole or part of the awarded quantity from any other sources as per the provisions of PPR and PPA. In that case the procuring entity may not be receiving the rest quantity of the Textbook from the suppliers/printers.

Brief Description of Goods,Works or Service

For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes 1 , 2 & 3 to be distributed free of cost for the Academic Year 2025.

For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes 1 , 2 & 3 to be distributed free of cost for the Academic Year 2025.

 
Save As PDF