View IFT /PQ / REOI / RFP / PPS Notice Details
Ministry : Ministry of Local Government, Rural Development and Co-operatives Division : Local Government Division
Organization : Dhaka North City Corporation Procuring Entity Name : Office of the Project Director, Construction of Multistoried Cleaners Residential Complex at Gabtoli City Polli under Dhaka North City Corporation
Procuring Entity Code : Procuring Entity District : Dhaka
Procurement Nature : Works Procurement Type : NCT
Event Type : Invitation for : Tender - Single Lot
Invitation Reference No. : e-GP-46.10.0000.107.14.1236.24 Date: 15/01/2024 Tender/Proposal Status :
App ID : 207229 Tender/Proposal ID : 1027855
Key Information and Funding Information :
Procurement Method : Open Tendering Method (OTM) Budget Type : Development
Source of Funds : Government
Particular Information :
Project Code : 224036700 Project Name : Construction of Multistoried Cleaners Residential Complex at Gabtoli City Polli under Dhaka North City Corporation
Tender/Proposal Package No. and Description : CMCRC-W-06
Supply and Installation of Electrical Sub-station, Generator, Lift external electrification, Solar system, Substation, Generator & Pump house construction and other Electrical Works under Gabtoli city Palli Project.
Category : Electric motors, generators and transformers; Electrical machinery, apparatus, equipment and consumables; Electricity distribution and control apparatus; Insulated wire and cable; Electrical machinery, apparatus, equipment and consumables; Lighting equipment and electric lamps; Electrical equipment and apparatus; Electrical machinery, apparatus, equipment and consumables; Electronic, electromechanical and electrotechnical supplies; Solar energy; Electricity, gas, nuclear energy and fuels, steam, hot water and other sources of energy; Building completion work;Electric motors;Generators;Alternators;Cooling towers;Ballasts for discharge lamps or tubes;Parts of electric motors, generators and transformers;Transformers;Electrical apparatus for switching or protecting electrical circuits;Electrical circuit components;Parts of electricity distribution or control apparatus;Mains;Power distribution cables;Coaxial cable;Insulated cable accessories;Electric conductors for data and control purposes;Electric filament lamps;Lamps and light fittings;Parts of lamps and lighting equipment;Electrical equipment for engines and vehicles;Sound or visual signalling apparatus;Magnets;Machines and apparatus with individual functions;Insulating fittings;Carbon electrodes;Electrical parts of machinery or apparatus;Electrical supplies and accessories;Electronic equipment;Electromechanical equipment;Electrotechnical equipment;Solar panels;Solar installation;Plastering work;Joinery and carpentry installation work;Floor and wall covering work;Painting and glazing work;Other building completion work
Scheduled Tender/Proposal Publication
Date and Time :
30-Oct-2024 10:00 Tender/Proposal Document last selling /
downloading Date and Time :
02-Dec-2024 12:00
Pre - Tender/Proposal meeting Start
Date and Time :
30-Oct-2024 12:00 Pre - Tender/Proposal meeting End
Date and Time :
10-Nov-2024 12:00
Tender/Proposal Closing
Date and Time :
02-Dec-2024 14:00 Tender/Proposal Opening
Date and Time :
02-Dec-2024 14:00
Last Date and Time for Tender/Proposal Security
Submission :
02-Dec-2024 13:00    
Information for Tenderer/Consultant :
Eligibility of Tenderer :

As per TDS.

Brief Description of Works :

Supply and Installation of Electrical Sub-station, Generator, Lift external electrification, Solar system, Substation, Generator & Pump house construction and other Electrical Works under Gabtoli city Palli Project. (package-W-06)

Evaluation Type : Lot wise
Document Available : Package wise
Document Fees : Package wise
Tender/Proposal Document Price (In BDT) : 4000
Mode of Payment :
Tender/Proposal Security Valid Up to : 29-Apr-2025
Tender/Proposal Valid Up to : 01-Apr-2025
Lot No. Identification of Lot Location Tender/Proposal security
(Amount in BDT)
Tentative Start Date Tentative Completion Date
1 Supply and Installation of Electrical Sub-station, Generator, Lift external electrification, Solar system, Substation, Generator & Pump house construction and other Electrical Works under Gabtoli city Palli Project. Gabtoli 7500000 01-Jan-2025 31-Aug-2025
Procuring Entity Details:
Name of Official Inviting Tender/Proposal : Md. Rafiqul Islam Designation of Official Inviting Tender/Proposal : Project Director
Address of Official Inviting Tender/Proposal :
Address: Nagar Bhaban, Level-9, Plot No.-23-26, Gulshan-2
City: Dhaka
Thana: Gulshan
District: Dhaka - 1212
Country: Bangladesh
Contact details of Official Inviting Tender/Proposal :
Phone No: 88-02-9854771
Fax No:
The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs
Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.
Documents
Amendment / Corrigendum Detail
 Amendment / Corrigendum No. :  3 
Amendment / Corrigendum Text :

BOQ correction.

Field Name Old Value New Value
Document last selling date & time 27/11/2024 12:00 02/12/2024 12:00
Opening Date & Time 27/11/2024 14:00 02/12/2024 14:00
Last date & time for Tender/Proposal Security Submission 27/11/2024 13:00 02/12/2024 13:00
Closing Date & Time 27/11/2024 14:00 02/12/2024 14:00
TDS/PDS--D. Tender Preparation--

The Tenderer shall submit with its Tender the following additional documents:

(a) The Tender Submission Letter (Form e-PW3-1) as furnished in Section 5: e-Tender Forms;

 

(b) Tenderer Information (Form e-PW3-2) as furnished in Section 5: e-Tender Forms;

 

(c) The priced Bill of Quantities for each lot in accordance with ITT Clauses 26 and 27;

 

(d) Tender Security as stated under ITT Clauses 34 and 35.

(e) Written confirmation authorizing the signatory of the Tenderer including National ID to submit the e-Tender, as stated under ITT Sub Clause 39.4;

(f) Valid Trade license to be mapped from e-GP Common document library of the Tenderer ;

(g) Documentary evidence of Tax Identification Number (TIN) and Value Added Tax (VAT) as a proof of taxation obligations as stated under ITT Sub Clause 5.10 to be mapped from e-GP Common document library of the Tenderer;

(h) Technical Proposal describing work plan & method, personnel, equipment and schedules as stated under ITT Clause 30;

(i) documentary evidence as stated under ITT Clause 28 and 31 establishing the Tenderer’s eligibility and the minimum qualifications of the Tenderer required to be met for due performance of the Works and physical services under the Contract;

(j) Documents establishing legal and financial autonomy and compliance with commercial law, as stated under ITT Sub-clause 5.4 in case of government owned entity;

(k) Tenderer’s Past Performance Information to be provided in ‘ Tenderer's Past Performance Information e-PW3 – 5 (A) and 5(B) ’ ; and

 

For Sub station-Generator:

1. Up to date "ABC" catagory contractor & Supervisory license from electricity licencing Board of Bangladesh.

2. Complete Site visit report duly authenticated by Engineer-in-Charge; not below the rank of AE

of PE office.

3.  List of electrical equipment in Bidder's official pad mentioning the IFT reference

4. Manufacturer Authorization Letters mentioning Model No. [Substation
equipments,Generator]

5. Warranty Certificate issued by the Manufacturer [Substation equipments,Generator]

6. Spare Parts Supplying Assurance Certificate Issued by the Manufacturer.[Substation
equipments,Generator]

7. After Sales Service Assurance Certificate issued by the Manufacturer/ Tenderer for proposed
brand of goods

8. Valid ISO-9001Certificate of the Sub-station Manufacturer or evidence that the
assembler is a Govt. of Bangladesh owned/ shared company.

9. Technical proposal issued by the manufacturing company, duly sealed and signed by the bidder.

10. Catalog/ brochure of proposed items mentioning brand and country of origin.

11. Type Test Certificate for the proposed brand of 11 KV HT Panel with LBS, Transformer, PFI
Plant and LT Switchgear

12. Type Test Certificate for XLPE cable and NYY Cable.

13. Country of origin declaration for Generator [concern chamber of commerce certificate of the
engine, alternator, ATS, Canopy should be submitted]

14. Tenderer shall submit an assurance certificate declaring explicitly to perform the job within time

duly. (Bar chart or gantt chart) 

 

For lift 1

1. The bidder shall give the assurance from the manufacturing company to supply of spare parts
for minimum 20 years and this assurance must be authenticated by the Chamber of Commerce/
Ministry of Commerce/ Ministry of foreign affairs of the concerned manufacturing Country.

2. Before submitting Lift installation drawing the Lift company must visit the site to ensure Door
height, Floor Level, Core allignment, pit depth,Machine room height etc to avoid any cutting
,alternation of the structure.

3. All electrical and civil works mending good the damages in connection with installation of the lift
shall be carried out by concern Bidder.

4. The bidder shall submit the technical proposal with sealed & signed by manufacturing company
and catalogue (marked) including mentioning brand, model & country of origin of the proposed lift.

5. The bidder shall submit a certificate by manufacturing company stated that minimum 200 Nos.
of the proposed lift have been used in minimum 10 (ten) countries
of the world including the
manufacturing country for equal to or more than ten years. The certificate must be authenticated by
Chamber of Commerce/ Ministry of Commerce/ Ministry of Foreign Affairs of the lift manufacturing
Country.

6. The main parts of the proposed lift such as motor, gear box/gearless, controller, cabin, door

and door drive system must follow the actual drawing, design of the lift manufacturing country and the logo/name of the manufacturing country must be embedded with the body of the proposed lift.

7. Country of origin declaration for Lift  A certificate must be submitted which stated that the other parts of the proposed lift are made
of/made by/supplied by the lift manufacturing company. Without importing from the lift
manufacturing company, use of any other parts/components is not permissible.

8. The block diagram of the complete lift system including all control system with ACVVVF, power
components must be submitted with the contract.

9. The bidder shall submit the detail address of the factory, telephone no., website address, email
address and company profile of the lift manufacturing company.

10. Before shipment, Factory Acceptance Test (performance test of safety devices of lift and

Quality assurance tests of the products as per standards) shall have to be carried out by the
manufacturer in presence of nominated engineers/personal of DNCC at the lift manufacturing factory
premises. Four (04) personal will be nominated for 20 lift. All cost related to nominated personal's
travel, food, accommodation, etc. will be borne by awarded organization/Manufacturer. The
expenditure for this will be incorporated by the bidder at the time of participation. For special
reasons if inspection is not performed by the engineers of the DNCC, taking prior approval of the
procuring entity quality assurance tests will be carried out by Internationally accepted inspection
agencies (home and abroad).

11. Post landing inspection for imported lift(s) shall be done by representatives (nominated two personal) of Procuring Entity 
according to the packing list and the expenditure for it will be carried out by Contractor /Supplier.
After post landing inspection from the port, the imported equipment shall be reached directly to the
project site according to the condition of the contract.

12. All other required qualification Terms & Conditions of the Tender are shown in the ITT, GCC
and Special terms & condition of Tender Documents.

 

(l) any other document as specified in the TDS.

The Tenderer shall submit with its Tender the following additional documents:

(a) The Tender Submission Letter (Form e-PW3-1) as furnished in Section 5: e-Tender Forms;

 

(b) Tenderer Information (Form e-PW3-2) as furnished in Section 5: e-Tender Forms;

 

(c) The priced Bill of Quantities for each lot in accordance with ITT Clauses 26 and 27;

 

(d) Tender Security as stated under ITT Clauses 34 and 35.

(e) Written confirmation authorizing the signatory of the Tenderer including National ID to submit the e-Tender, as stated under ITT Sub Clause 39.4;

(f) Valid Trade license to be mapped from e-GP Common document library of the Tenderer ;

(g) Documentary evidence of Tax Identification Number (TIN) and Value Added Tax (VAT) as a proof of taxation obligations as stated under ITT Sub Clause 5.10 to be mapped from e-GP Common document library of the Tenderer;

(h) Technical Proposal describing work plan & method, personnel, equipment and schedules as stated under ITT Clause 30;

(i) documentary evidence as stated under ITT Clause 28 and 31 establishing the Tenderer’s eligibility and the minimum qualifications of the Tenderer required to be met for due performance of the Works and physical services under the Contract;

(j) Documents establishing legal and financial autonomy and compliance with commercial law, as stated under ITT Sub-clause 5.4 in case of government owned entity;

(k) Tenderer’s Past Performance Information to be provided in ‘ Tenderer's Past Performance Information e-PW3 – 5 (A) and 5(B) ’ ; and

 

For Sub station-Generator:

1. Up to date "ABC" catagory contractor & Supervisory license from electricity licencing Board of Bangladesh.

2. Complete Site visit report to avoid any alternation of the structure.

3.  List of electrical equipment in Bidder's official pad mentioning the IFT reference

4. Manufacturer Authorization Letters mentioning Model No. [Substation
equipments,Generator]

5. Warranty Certificate issued by the Manufacturer [Substation equipments,Generator]

6. Spare Parts Supplying Assurance Certificate Issued by the Manufacturer.[Substation
equipments,Generator]

7. After Sales Service Assurance Certificate issued by the Manufacturer/ Tenderer for proposed
brand of goods

8. Valid ISO-9001Certificate of the Sub-station Manufacturer or evidence that the
assembler is a Govt. of Bangladesh owned/ shared company.

9. Technical proposal issued by the manufacturing company, duly sealed and signed by the bidder.

10. Catalog/ brochure of proposed items mentioning brand and country of origin.

11. Type Test Certificate for the proposed brand of 11 KV HT Panel with LBS, Transformer, PFI
Plant and LT Switchgear

12. Type Test Certificate for XLPE cable and NYY Cable.

13. Country of origin declaration for Generator [concern chamber of commerce certificate of the
engine, alternator, ATS, Canopy should be submitted]

14. Tenderer shall submit an assurance certificate declaring explicitly to perform the job within time

duly. (Bar chart or gantt chart) 

 

For lift 1

1. The bidder shall give the assurance from the manufacturing company to supply of spare parts
for minimum 20 years and this assurance must be authenticated by the Chamber of Commerce/
Ministry of Commerce/ Ministry of foreign affairs of the concerned manufacturing Country.

2. Before submitting Lift installation drawing the Lift company must visit the site to ensure Door
height, Floor Level, Core allignment, pit depth,Machine room height etc to avoid any cutting
,alternation of the structure.

3. All electrical and civil works mending good the damages in connection with installation of the lift
shall be carried out by concern Bidder.

4. The bidder shall submit the technical proposal with sealed & signed by manufacturing company
and catalogue (marked) including mentioning brand, model & country of origin of the proposed lift.

5. The bidder shall submit a certificate by manufacturing company stated that minimum 200 Nos.
of the proposed lift have been used in minimum 10 (ten) countries
of the world including the
manufacturing country for equal to or more than ten years. The certificate must be authenticated by
Chamber of Commerce/ Ministry of Commerce/ Ministry of Foreign Affairs of the lift manufacturing
Country.

6. The main parts of the proposed lift such as motor, gear box/gearless, controller, cabin, door

and door drive system must follow the actual drawing, design of the lift manufacturing country and the logo/name of the manufacturing country must be embedded with the body of the proposed lift.

7. Country of origin declaration for Lift  A certificate must be submitted which stated that the other parts of the proposed lift are made
of/made by/supplied by the lift manufacturing company. Without importing from the lift
manufacturing company, use of any other parts/components is not permissible.

8. The block diagram of the complete lift system including all control system with ACVVVF, power
components must be submitted with the contract.

9. The bidder shall submit the detail address of the factory, telephone no., website address, email
address and company profile of the lift manufacturing company.

10. Before shipment, Factory Acceptance Test (performance test of safety devices of lift and

Quality assurance tests of the products as per standards) shall have to be carried out by the
manufacturer in presence of nominated engineers/personal of DNCC at the lift manufacturing factory
premises. Four (04) personal will be nominated for 20 lift. All cost related to nominated personal's
travel, food, accommodation, etc. will be borne by awarded organization/Manufacturer. The
expenditure for this will be incorporated by the bidder at the time of participation. For special
reasons if inspection is not performed by the engineers of the DNCC, taking prior approval of the
procuring entity quality assurance tests will be carried out by Internationally accepted inspection
agencies (home and abroad).

11. Post landing inspection for imported lift(s) shall be done by representatives (nominated two personal) of Procuring Entity 
according to the packing list and the expenditure for it will be carried out by Contractor /Supplier.
After post landing inspection from the port, the imported equipment shall be reached directly to the
project site according to the condition of the contract.

12. All other required qualification Terms & Conditions of the Tender are shown in the ITT, GCC
and Special terms & condition of Tender Documents.

 

(l) any other document as specified in the TDS.

 Amendment / Corrigendum No. :  2 
Amendment / Corrigendum Text :

TDS correction.

Field Name Old Value New Value
TDS/PDS--C. Qualification Criteria--

(a) The minimum number of years of general experience of the Tenderer in the construction works as Prime Contractor or Subcontractor or Management Contractor shall be 07 (Seven) years.

 

 

(b) The minimum specific experience as a Prime Contractor in construction works of at least Single of contract of similar nature (installation and testing commissioning of Lift, Electrical Substation, Generator, Home solar and related civil works in a single package), complexity and methods/construction technology successfully completed within the last 05 (Five) years, each with a value of at least Tk.22 (twenty two) crore.

(a) The minimum number of years of general experience of the Tenderer in the construction works as Prime Contractor or Subcontractor or Management Contractor shall be 07 (Seven) years.

 

 

(b) The minimum specific experience as a Prime Contractor in construction works of at least Single of contract of similar nature (installation and testing commissioning of Lift, Electrical Substation and related Electrical & civil works in a single package), complexity and methods/construction technology successfully completed within the last 05 (Five) years with a value of at least Tk.22 (twenty two) crore.

 Amendment / Corrigendum No. :  1 
Amendment / Corrigendum Text :

Some changes in documents has done.

Field Name Old Value New Value
Eligibility of Consultant

As per TDS.

As per TDS.

TDS/PDS--C. Qualification Criteria--

(a) The minimum number of years of general experience of the Tenderer in the construction works as Prime Contractor or Subcontractor or Management Contractor shall be 07 (Seven) years.

 

 

(b) The minimum specific experience as a Prime Contractor in construction works of at least Single of contract of similar nature (installation and testing commissioning, minimum 5 nos of  1000kg capacity Lift, minimum 1 no of 1250 KVA capacity Electrical Substation, minimum 1 no of 400KVA capacity  Generator,  Deep tubewell, Home solar and related civil works in a single package), complexity and methods/construction technology successfully completed within the last 03 (three) years, each with a value of at least Tk.27 (twenty seven) crore.

(a) The minimum number of years of general experience of the Tenderer in the construction works as Prime Contractor or Subcontractor or Management Contractor shall be 07 (Seven) years.

 

 

(b) The minimum specific experience as a Prime Contractor in construction works of at least Single of contract of similar nature (installation and testing commissioning of Lift, Electrical Substation, Generator, Home solar and related civil works in a single package), complexity and methods/construction technology successfully completed within the last 05 (Five) years, each with a value of at least Tk.22 (twenty two) crore.

Brief Description of Goods,Works or Service

Supply and Installation of Electrical Sub-station, Generator, Lift external electrification, Solar system, Substation, Generator & Pump house construction and other Electrical Works under Gabtoli city Palli Project. (package-W-06)

Supply and Installation of Electrical Sub-station, Generator, Lift external electrification, Solar system, Substation, Generator & Pump house construction and other Electrical Works under Gabtoli city Palli Project. (package-W-06)

 
Save As PDF