View IFT /PQ / REOI / RFP / PPS Notice Details
|
Amendment / Corrigendum No. : 1
|
|
| Amendment / Corrigendum Text : | Due to unavoidable circumstance |
| Field Name | Old Value | New Value |
|---|---|---|
| Document last selling date & time | 23/03/2025 17:00 | 09/04/2025 17:00 |
| Eligibility of Consultant | Any / All tenderers who have registered in e-GP system may participate in the tender provided that they fulfill the criteria as stated in Tender Document N.B: i) Tenderers are requested to fill different Tender Forms (Section 5: Tender and Contract Forms) properly with necessary information and by uploading necessary document(s), which will be considered for tender evaluation. ii) Tenderers are requested not to upload/ attach any unnecessary documents. |
Any / All tenderers who have registered in e-GP system may participate in the tender provided that they fulfill the criteria as stated in Tender Document N.B: i) Tenderers are requested to fill different Tender Forms (Section 5: Tender and Contract Forms) properly with necessary information and by uploading necessary document(s), which will be considered for tender evaluation. ii) Tenderers are requested not to upload/ attach any unnecessary documents. |
| Opening Date & Time | 24/03/2025 12:00 | 10/04/2025 12:00 |
| Last date & time for Tender/Proposal Security Submission | 24/03/2025 11:30 | 10/04/2025 11:30 |
| Start Date(Lot No : 01) | 24/04/2025 | 08/05/2025 |
| Closing Date & Time | 24/03/2025 12:00 | 10/04/2025 12:00 |
| TDS/PDS--C. Qualification Criteria-- | 15.1(a) The minimum number of years of general experience of the Tenderer in the construction works as a Prime Contractor or Subcontractor or Management Contractor shall be 03 (three) years. Years will be counted backward from the date of publication of IFT in the Website. 15.1(b): A. Tenderers Experience: The minimum specific experience as a Prime Contractor or Sub Contractor or Management Contractor in construction works of similar nature and complexity and methods/construction technology successfully completed within the last 10 (ten) years of successful completion of at least 1(one) PC Girder Bridge work having minimum value of Tk. 23.00 (twenty-three) Crore in a single contract. Years will be counted backward from the date of publication of IFT in e-GP website. The tenderer must propose a manufacturer for fabrication of steel components of the bridge as a subcontractor provided that the proposed sub-contractor comply with the manufacturers requirements as specified in “B. Manufacturer’s requirements” OR The minimum specific experience as a Prime Contractor or Sub Contractor or Management Contractor in construction works of similar nature and complexity and methods/construction technology successfully completed within the last 10 (ten) years of successful completion of at least 1(one) Combination of PC Girder and Steel Arch /Permanent Steel Truss composite Bridge (Dummy, Ornamental & Non-Structural Arch Bridge, Portable Steel Bridge and Bailey Bridge shall not be considered) work having minimum value of Tk. 23.00 (twenty-three) Crore in a single contract. Years will be counted backward from the date of publication of IFT in e-GP website.
Tenderer shall submit the notarized authorization letter specifying the tender ID and name of the work conforming to the following technical criteria substantiated by documents from the manufacturer along with tender. In case of the tenderer being the manufacturer, the tenderer shall submit his own notarized authorization. Manufacturer shall confirm that the supply of the steel bridge components in full within the contract period.
Technical Criteria: 1. The steel bridge fabricator must have automatic gas cutting machine or plasma cutting machine for cutting of principal members. Note :
1) The work completion certificate will clearly state quantity of each of the key activities mentioned above, contract value, final bill amount, contract date, actual completion date, Major Items of Work done with quantities (if major items with quantities are not stated in the completion certificate, final IPC with the items and quantities is required to be attached as evidence along with the completion certificate) etc. |
15.1(a) The minimum number of years of general experience of the Tenderer in the construction works as a Prime Contractor or Subcontractor or Management Contractor shall be 03 (three) years. Years will be counted backward from the date of publication of IFT in the Website. 15.1(b): A. Tenderers Experience: The minimum specific experience as a Prime Contractor or Sub Contractor or Management Contractor in construction works of similar nature and complexity and methods/construction technology successfully completed within the last 10 (ten) years of successful completion of at least 1(one) PC Girder Bridge work having minimum value of Tk. 23.00 (twenty three) Crore in a single contract. Years will be counted backward from the date of publication of IFT in e-GP website. The tenderer must propose a manufacturer for fabrication of steel components of the bridge as a subcontractor provided that the proposed sub-contractor comply with the manufacturers requirements as specified in “B. Manufacturer’s requirements” OR The minimum specific experience as a Prime Contractor or Sub Contractor or Management Contractor in construction works of similar nature and complexity and methods/construction technology successfully completed within the last 10 (ten) years of successful completion of at least 1(one) Combination of PC Girder and Steel Arch /Permanent Steel Truss composite Bridge (Dummy, Ornamental & Non-Structural Arch Bridge, Portable Steel Bridge and Bailey Bridge shall not be considered) work having minimum value of Tk. 23.00 (twenty-three) Crore in a single contract. Years will be counted backward from the date of publication of IFT in e-GP website.
For this tender, A Manufacturer/Subcontractor may participate with more than one Tenderer but only in that Capacity.
Tenderer shall submit the notarized authorization letter specifying the tender ID and name of the work conforming to the following technical criteria substantiated by documents from the manufacturer along with tender. In case of the tenderer being the manufacturer, the tenderer shall submit his own notarized authorization. Manufacturer shall confirm that the supply of the steel bridge components in full within the contract period.
Technical Criteria: 1. The steel bridge fabricator must have automatic gas cutting machine or plasma cutting machine for cutting of principal members. Note :
1) The work completion certificate will clearly state quantity of each of the key activities mentioned above, contract value, final bill amount, contract date, actual completion date, Major Items of Work done with quantities (if major items with quantities are not stated in the completion certificate, final IPC with the items and quantities is required to be attached as evidence along with the completion certificate) etc. |
| Brief Description of Goods,Works or Service | Construction of 94.274m (3X30.488m) Long PC Girder Bridge (Hatirdia Bridge) Old Bhramopotru River at 42th Km on Mawna-Sreepur-Gosingha-Kapasia-Aral-Sonmania-Hatirdia-Monohordi Road (R-313) Under Gazipur Road Division during the year 2022-2023 [WP-06] |
Construction of 94.274m (3X30.488m) Long PC Girder Bridge (Hatirdia Bridge) Old Bhramopotru River at 42th Km on Mawna-Sreepur-Gosingha-Kapasia-Aral-Sonmania-Hatirdia-Monohordi Road (R-313) Under Gazipur Road Division during the year 2022-2023 [WP-06] |