| PCC 18. Scope of Supply18.1Scope of Supply
|
| Scope of Supply |
|---|
| The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbook. Within first 25 days of the total contract days, tenderer must deliver 20% of the total deliverable/contract products, within next 25 days of the total contract days, tenderer must deliver 40% of the total deliverable/contract products excluding previous 20% and the rest 40% of the contract products shall be delivered within next 20 days. If tenderer fails to deliver 60% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, tenderer must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory in specified scheduled time, PE has the right to terminate the contract immediately and also right to forfeit the performance security.
| | The method and conditions of payment to be made as follows: i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) The tenderer shall submit bill to Procuring Entity after completing the task as mentioned in the contract. b) If supplier delivers 60% of the contract goods within specified time then 80% payment of delivered goods in good condition will be paid by NCTB upon challan received from respective destination through NCTB's web application as well as printed copy. (c) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after receiving challan from the respective DEO/USEO/TSEO and PDI report & ERC report. (d) Remaining 20% payment shall be paid after receiving the Post Landing Inspection (PLI) report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. Any defective textbook is found in PLI report, tenderer must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. Final payment will be settled subject to resolve all claims. (e) Tenderer shall submit bill for individual tender including 1 (one) set of download copy of approved challan by respective DEO/USEO/TSEO and 2 (two) sets photocopy of the same challan. Payment will be made within the short time on receipt of bill along with approved challan & ERC Report from NCTB. (f) If the number of forma (of textbooks) increase or decrease, the quoted price may be increased or decreased. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times.
| |
| Scope of Supply |
|---|
| The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbook. Within first 25 days of the total contract days, tenderer must PDI 20% of the total deliverable/contract products, within next 25 days of the total contract days, tenderer must deliver 60% of the total deliverable/contract products including previous 20% and the rest 40% of the contract products shall be delivered within next 20 days. If tenderer fails to deliver 60% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, tenderer must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory in specified scheduled time, PE has the right to terminate the contract immediately and also right to forfeit the performance security. | | The method and conditions of payment to be made as follows: i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) The tenderer shall submit bill to Procuring Entity after completing the task as mentioned in the contract. b) If supplier delivers 60% of the contract goods within specified time then 80% payment of delivered goods in good condition will be paid by NCTB upon challan received from respective destination through NCTB's web application as well as printed copy. (c) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after receiving challan from the respective DEO/USEO/TSEO and PDI report & ERC report. (d) Remaining 20% payment shall be paid after receiving the Post Landing Inspection (PLI) report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. Any defective textbook is found in PLI report, tenderer must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. Final payment will be settled subject to resolve all claims. (e) Tenderer shall submit bill for individual tender including 1 (one) set of download copy of approved challan by respective DEO/USEO/TSEO and 2 (two) sets photocopy of the same challan. Payment will be made within the short time on receipt of bill along with approved challan & ERC Report from NCTB. (f) If the number of forma (of textbooks) increase or decrease, the quoted price may be increased or decreased. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times.
| |
| TDS/PDS--C. Qualification Criteria--
|
Tenderer shall have a minimum of 02 (two) years of general experience.
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For each tender, tenderer must have the minimum specific experience individually in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed within the last 05 (five) years, each with a value of Tk. 11590000
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment challan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/challan submission is not required.
ii) In case of NCTB’s work experience of academic year 2025, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.
The minimum supply and/or production capacity of goods is/ are:
1. The tenderer must have own sufficient machineries for cover printing and content printing, machineries for perfect/Auto Glue binding and UV of textbook laminating machine to execute the contract. No contractual printing machines will be considered. Required machineries and production capacity to execute the contract are given bellow:
|
Sl No |
Name of Machine |
Size of Machine |
Color of Machine |
Capacity
(Per day)
|
|
1 |
Sheet Machine
(Cover Printing) |
23"×36"/ above |
Bi color/4 color/ above color |
|
|
2 |
Web Machine (Content Printing) |
20"×30" |
4 color |
400 reams
(For Four Color Content Printing) |
|
3 |
Web Machine (Content Printing) |
20"×30" |
4 color |
600 reams
(For Single Color Content Printing) |
|
4 |
Web Machine (Content Printing) |
20"×30" |
1 color |
600 reams
(For Single Color Content Printing) |
|
5 |
Sheet Machine (Content Printing) |
20"×30"/ above |
4 color |
80 reams |
|
6 |
Sheet Machine (Content Printing) |
20"×30"/ above |
2 color |
60 reams |
|
7 |
Sheet Machine (Content Printing) |
20"×30"/ above |
1 color |
60 reams |
|
8 |
Auto interleaf Machine |
|
|
120000 books per day |
|
9 |
Manual interleaf |
|
|
7000 books per person per day |
|
10 |
Auto Glue Binding Machine |
|
|
2000 books per clam per day |
|
11 |
Cutting Machine |
Three knife |
|
120000 books per day |
|
12 |
Cutting Machine |
One knife |
|
40000 books per day |
|
13 |
U.V (Ultra Varnish) |
|
|
Must have minimum one machine |
|
14 |
Auto bundle Machine |
|
|
Must have minimum one machine |
|
15 |
GSM weight balance machine with Cutter |
|
|
Must have minimum one machine |
Table-1
2. A printing unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper Exccpt NCTB's Specification.
3. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
4. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
5. Adequate toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
6. A printing unit shall have a set of computer with trained operator and all time internet connection.
7. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
8. Physical facilities of the tenderer shall be inspected by the TEC or NCTB's inspection committee. Tenderer must have to show each printing/binding machine in running condition with a sample printing and binding. Number of tender(s) will be awarded as per the machine capacity of the tenderers.
9. TEC will consider the latest performance report at the time of tender evaluation. If TEC does not satisfy a tenderer’s production capacity which is mentioned in the table-1, it may declare the tenderer non-responsive.
10. A tenderer’s 60 (Sixty) day’s production capacity (Printing, Binding and Cutting) will be considered as full capacity for tender evaluation.
(a) For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB. At the time of tender evaluation (by the concern TEC), occupied machines shall not be considered for another tender under the HOPE of NCTB. PE will supply unoccupied production capacity to TEC for tender evaluation.
|
Tenderer shall have a minimum of 02 (two) years of general experience.
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For each tender, tenderer must have the minimum specific experience individually in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed within the last 05 (five) years, each with a value of Tk. 11590000
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment challan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/challan submission is not required.
ii) In case of NCTB’s work experience of academic year 2025, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.
The minimum supply and/or production capacity of goods is/ are:
1. The tenderer must have own sufficient machineries for cover printing and content printing, machineries for perfect/Auto Glue binding and UV of textbook laminating machine to execute the contract. No contractual printing machines will be considered. Required machineries and production capacity to execute the contract are given bellow:
|
Sl No |
Name of Machine |
Size of Machine |
Color of Machine |
Capacity
(Per day)
|
|
1 |
Sheet Machine
(Cover Printing) |
23"×36"/ above |
Bi color/4 color/ above color |
|
|
2 |
Web Machine (Content Printing) |
20"×30" |
4 color |
400 reams
(For Four Color Content Printing) |
|
3 |
Web Machine (Content Printing) |
20"×30" |
4 color |
600 reams
(For Single Color Content Printing) |
|
4 |
Web Machine (Content Printing) |
20"×30" |
1 color |
600 reams
(For Single Color Content Printing) |
|
5 |
Sheet Machine (Content Printing) |
20"×30"/ above |
4 color |
80 reams |
|
6 |
Sheet Machine (Content Printing) |
20"×30"/ above |
2 color |
60 reams |
|
7 |
Sheet Machine (Content Printing) |
20"×30"/ above |
1 color |
60 reams |
|
8 |
Auto Online Book Binding Machine (Gathering+Glue Binding+Cutting) |
|
|
96000 books per day |
|
9 |
Auto interleaf Machine (Only Gathering) |
|
|
96000 books per day |
|
10 |
Manual interleaf |
|
|
7000 books per person per day |
|
11 |
Auto Glue Binding Machine |
|
|
2300 books per clam per day |
|
12 |
Cutting Machine |
Three knife |
|
96000 books per day |
|
13 |
Cutting Machine |
One knife |
|
32000 books per day |
|
14 |
U.V (Ultra Varnish) |
|
|
Must have minimum one machine |
|
15 |
Auto bundle Machine |
|
|
Must have minimum one machine |
|
16 |
GSM weight balance machine with Cutter |
|
|
Must have minimum one machine |
Table-1
2. A printing unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper Exccpt NCTB's Specification.
3. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
4. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
5. Adequate toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
6. A printing unit shall have a set of computer with trained operator and all time internet connection.
7. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
8. Physical facilities of the tenderer shall be inspected by the TEC or NCTB's inspection committee. Tenderer must have to show each printing/binding machine in running condition with a sample printing and binding. Number of tender(s) will be awarded as per the machine capacity of the tenderers.
9. TEC will consider the latest performance report at the time of tender evaluation. If TEC does not satisfy a tenderer’s production capacity which is mentioned in the table-1, it may declare the tenderer non-responsive.
10. A tenderer’s 60 (Sixty) day’s production capacity (Printing, Binding and Cutting) will be considered as full capacity for tender evaluation.
(a) For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB. At the time of tender evaluation (by the concern TEC), occupied machines shall not be considered for another tender under the HOPE of NCTB. PE will supply unoccupied production capacity to TEC for tender evaluation.
Updated Delivery Schedule: https://drive.google.com/file/d/198N-MMJllDsQrb66zOSGBzdzmFeWuRAx/view?usp=sharing
|
| TDS/PDS--D. Tender Preparation--
|
The Tenderer shall submit with its Tender the following additional documents:
1. Copy of individual Press Declaration for each unit or Press Declaration mentioning each unit.
2. Ownership document of printing press.
3. Updated Trade License for each unit or Updated Trade License mentioning each unit.
4. Latest Tax payment certificate mentioning proprietorship of the Tenderer.
5. VAT registration certificate
6. List of permanent staffs.
7. List of manual interleaf staffs.
8. All unit address and unit wise list of machineries for printing, interleaf, cutting, binding, bundling, etc.
9. Certificate issued by the concern bank stating that the applicant is not in default of debt according to CIB report of Bangladesh Bank.
|
The Tenderer shall submit with its Tender the following additional documents:
1. Copy of individual Press Declaration for each unit or Press Declaration mentioning each unit (In case of address change of the press or unit of the press, received copy of application to appropriate authority mentioning the change of address will be accepted).
2. Ownership document of printing press.
3. Updated Trade License for each unit or Updated Trade License mentioning each unit.
4. Latest Tax payment certificate mentioning proprietorship of the Tenderer.
5. VAT registration certificate
6. List of permanent staffs.
7. List of manual interleaf staffs.
8. All unit address and unit wise list of machineries for printing, interleaf, cutting, binding, bundling, etc.
9. Certificate issued by the concern bank stating that the applicant is not in default of debt according to CIB report of Bangladesh Bank.
|
| Brief Description of Goods,Works or Service
|
For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026.
|
For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026.
|