View IFT /PQ / REOI / RFP / PPS Notice Details
Ministry : Ministry of Education Division : Secondary and Higher Education Division
Organization : National Curriculum and textbook Board (NCTB) Procuring Entity Name : Member (Textbook), NCTB
Procuring Entity Code : Procuring Entity District : Dhaka
Procurement Nature : Goods Procurement Type : NCT
Event Type : Invitation for : Tender - Single Lot
Invitation Reference No. : 37.06.0000.303.07.005.25.2709 Tender/Proposal Status :
App ID : 213458 Tender/Proposal ID : 1106278
Key Information and Funding Information :
Procurement Method : Open Tendering Method (OTM) Budget Type : Revenue
Source of Funds : Government
Particular Information :
Project Code : Not applicable Project Name : Not applicable
Tender/Proposal Package No. and Description : GD.100.ENG.V_6.681
For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026.
Category : Various types of printed matter and articles for printing; Printing, publishing and related services;Printed books, brochures and leaflets;Printed books;Publications;Directories;Leaflets;Brochures;Booklets;Newspapers, journals, periodicals and magazines;Newspapers;Postcards, greeting cards and other printed matter;Postcards;Greeting cards;Stamps, cheque forms, banknotes, stock certificates, trade advertising material, catalogues and manuals;Stamps;Stamp-impressed paper;Banknotes;Cheque forms;Security-type printed matter;Trade-advertising material, commercial catalogues and manuals;Manuals;Printing plates or cylinders or other media for use in printing;Offset plates;Dry-etching equipment;Paper or paperboard registers, account books, binders, forms and other articles of printed stationery;Paper or paperboard registers;Forms;Exercise books;Albums for samples;Binders and related accessories;Printed stationery except forms;Miscellaneous printed matter;Car-tax discs;Driving licences;ID cards;Permits;Entrance cards;Bespoke printed matter;Tickets;Printing services;Printing services for books;Printing services for stationery;Printing services for security printed matter;Printing services for forms;Printing services for tickets;Printing services for calendars;Printing services for timetables;Newspaper printing services;Printing services for posters;Services related to printing;Print finishing services;Composition services;Printing and delivery services;Printing and distribution services;Publishing services;Bookbinding and finishing services;Subscription services
Scheduled Tender/Proposal Publication
Date and Time :
05-May-2025 23:53 Tender/Proposal Document last selling /
downloading Date and Time :
01-Jun-2025 17:00
Pre - Tender/Proposal meeting Start
Date and Time :
05-May-2025 23:57 Pre - Tender/Proposal meeting End
Date and Time :
19-May-2025 17:00
Tender/Proposal Closing
Date and Time :
02-Jun-2025 14:00 Tender/Proposal Opening
Date and Time :
02-Jun-2025 14:00
Last Date and Time for Tender/Proposal Security
Submission :
02-Jun-2025 13:00    
Information for Tenderer/Consultant :
Eligibility of Tenderer :

As Per TDS

Brief Description of Goods and Related Service :

For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026.

Evaluation Type : Lot wise
Document Available : Package wise
Document Fees : Package wise
Tender/Proposal Document Price (In BDT) : 4000
Mode of Payment :
Tender/Proposal Security Valid Up to : 28-Oct-2025
Tender/Proposal Valid Up to : 30-Sep-2025
Lot No. Identification of Lot Location Tender/Proposal security
(Amount in BDT)
Tentative Start Date Tentative Completion Date
681 For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026. As Per Delivery Schedule 460000 14-Aug-2025 22-Oct-2025
Procuring Entity Details:
Name of Official Inviting Tender/Proposal : Riad Choudhury Designation of Official Inviting Tender/Proposal : Member (Textbook)
Address of Official Inviting Tender/Proposal :
Address: 69-70, Motijheel, C/A, Dhaka-1000
City: Dhaka
Thana: Motijheel
District: Dhaka - 1000
Country: Bangladesh
Contact details of Official Inviting Tender/Proposal :
Phone No: 02-9550805
Fax No:
The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs
Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.
Documents
Amendment / Corrigendum Detail
 Amendment / Corrigendum No. :  3 
Amendment / Corrigendum Text :

Update TDS & PCC

Field Name Old Value New Value
PCC 32. Inspections and Tests
32.1 Inspections and Tests

Goods Type of testTime or milestonePlaceProcedure
As stated in Technical Specification and Delivery Schedule in Drawing Section Pre-printing paper check Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB The tenderer should provide quality and quantity certificate from paper manufacturers confirming technical specifications. The tenderer shall apply for testing of printing paper to the inspection agent with a copy to PE, NCTB. The tenderer will go for printing after having the approved test report from the IA. The IA will collect samples, carryout tests of papers from IA's own laboratory. Tenderer will ensure that the quality of the paper matches with the agreed technical specifications. NCTB will facilitate and ensure the access of the IA to the printing materials including paper and other materials. Tenderer shall allow the IA to all printing materials, machineries and product at any time and as many times as required for applying the task of test under this procurement process for adhering to the contractual obligation of IA with NCTB. Further (a) if the tenderer's declared quantity does not match with the paper manufacturer certificate, in that case the IA will mark red color rejection seal on each rejected paper reels (it will be also applicable for cover and 120 GSM craft paper 13.5 inch X 11.25 inch). (b) The tenderer must have to remove the rejected printing/cover/craft paper from the printing premises or warehouse within 48 (forty eight) hours at the presence of the representative of IA.
As stated in Technical Specification and Delivery Schedule in Drawing Section Production Inspection Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB During inspection if it is found that the quality of paper, printing and binding are not being done as per the specifications, the inspectors shall instruct the tenderer to make necessary correction or modifications. The tenderer shall extend all assistances and co-operation during the time of inspection of the production premises and warehouse(s).
As stated in Technical Specification and Delivery Schedule in Drawing Section Pre-delivery inspection Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB (a) At the time of submitting the application of pre-delivery inspection to IA, the tenderer must have to ensure the equality between declared quantity and available quantity of textbooks. (b) If the textbooks does not matches with the technical specification and is being rejected, in that case the IA will mark red color rejection seal approved by NCTB on each rejected textbooks /bundle of textbooks. Finally all the rejected textbooks /bundle of textbooks must be destroyed with the presence of IA and monitoring officer of NCTB. IA will inspect textbooks furnished by the tenderer. IA has right to collect additional textbooks from printers warehouse. The test report of IA will depend on either furnished sample by the tenderer or collected copies from printing house by the inspection agent randomly by themselves. Sample size: At least 20 textbooks per contract/lot (may be in two steps for partial delivery). Quality check covers quality, quantity, packing, marking, loading etc. in line with the contract specifications.
As stated in Technical Specification and Delivery Schedule in Drawing Section Post Landing Inspection (PLI) Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB The IA will conduct quality inspection in district and upazila level, covering quality, quantity, marking storage etc. in line with the contract specifications. IA will inspect textbooks furnished by the tenderer. IA has the right to collect additional textbooks from District/Upazila/Thana. The test report of the IA will depend on either furnished samples by the supplier/tenderer or collected copies from by the inspection agent randomly by themselves. Sample size: At least 20 textbooks per contract (may be in two steps for partial delivery).
As stated in Technical Specification and Delivery Schedule in Drawing Section Final acceptance Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB (i) After delivery of 100% textbooks by the tenderer/supplier, the IA will collect specimen of textbooks from every district/upazila/thana through its own sources and carry out tests from inspection agent's own laboratory to ensure that the quality of paper matches with the agreed technical specifications. Sample size: At least 20 textbooks per contract. Inspection agent will prepare PLI report and that will be considered as final report. Defective books mentioned in PLI shall be replaced in time. Inspection agent will quantify the defective textbooks. NCTB may reconfirm the test reports from govt. laboratory like BCSIR OR BSTI to ensure the quality. (ii) A Committee will be formed including representatives of SHED, DSHE, NCTB and IA to quantify the low quality books. (iii) Supplier must replace for low quality textbook within 15 (Fifteen) days. If tenderer fails to deliver low quality textbook within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. If the tenderer fails to supply 100% textbooks within the contract period and for that reason PLI is not completed within the stipulated time, in that case for the further PLI arranged, inspection cost will be paid by the supplier/tenderer which will be equal of the Inspection Agent's expenditure for that -additional inspection.
Goods Type of testTime or milestonePlaceProcedure
As stated in Technical Specification and Delivery Schedule in Drawing Section Pre-printing paper check Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB The tenderer should provide quality and quantity certificate from paper manufacturers confirming technical specifications. The tenderer shall apply for testing of printing paper to the inspection agent with a copy to PE, NCTB. The tenderer will go for printing after having the approved test report from the IA. The IA will collect samples, carryout tests of papers from IA's own laboratory. Tenderer will ensure that the quality of the paper matches with the agreed technical specifications. NCTB will facilitate and ensure the access of the IA to the printing materials including paper and other materials. Tenderer shall allow the IA to all printing materials, machineries and product at any time and as many times as required for applying the task of test under this procurement process for adhering to the contractual obligation of IA with NCTB. Further (a) if the tenderer's declared quantity does not match with the paper manufacturer certificate, in that case the IA will mark red color rejection seal on each rejected paper reels (it will be also applicable for cover and 120 GSM craft paper 13.5 inch X 11.25 inch). (b) The tenderer must have to remove the rejected printing/cover/craft paper from the printing premises or warehouse within 48 (forty eight) hours at the presence of the representative of IA.
As stated in Technical Specification and Delivery Schedule in Drawing Section Production Inspection Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB During inspection if it is found that the quality of paper, printing and binding are not being done as per the specifications, the inspectors shall instruct the tenderer to make necessary correction or modifications. The tenderer shall extend all assistances and co-operation during the time of inspection of the production premises and warehouse(s).
As stated in Technical Specification and Delivery Schedule in Drawing Section Pre-delivery inspection Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB (a) At the time of submitting the application of pre-delivery inspection to IA, the tenderer must have to ensure the equality between declared quantity and available quantity of textbooks. (b) If the textbooks does not matches with the technical specification and is being rejected, in that case the IA will mark red color rejection seal approved by NCTB on each rejected textbooks /bundle of textbooks. Finally all the rejected textbooks /bundle of textbooks must be destroyed with the presence of IA and monitoring officer of NCTB. IA will inspect textbooks furnished by the tenderer. IA has right to collect additional textbooks from printers warehouse. The test report of IA will depend on either furnished sample by the tenderer or collected copies from printing house by the inspection agent randomly by themselves. Sample size: At least 20 textbooks per contract/lot (may be in two steps for partial delivery). Quality check covers quality, quantity, packing, marking, loading etc. in line with the contract specifications.
As stated in Technical Specification and Delivery Schedule in Drawing Section Post Landing Inspection (PLI) Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB The IA will conduct quality inspection in district and upazila level, covering quality, quantity, marking storage etc. in line with the contract specifications. IA will inspect textbooks furnished by the tenderer. IA has the right to collect additional textbooks from District/Upazila/Thana. The test report of the IA will depend on either furnished samples by the supplier/tenderer or collected copies from by the inspection agent randomly by themselves. Sample size: At least 20 textbooks per contract (may be in two steps for partial delivery).
As stated in Technical Specification and Delivery Schedule in Drawing Section Final acceptance Within Contract Period By Inspection Agent (IA)'s own LAB or BSTI LAB or BCSIR LAB (i) After delivery of 100% textbooks by the tenderer/supplier, the IA will collect specimen of textbooks from every district/upazila/thana through its own sources and carry out tests from inspection agent's own laboratory to ensure that the quality of paper matches with the agreed technical specifications. Sample size: At least 20 textbooks per contract. Inspection agent will prepare PLI report and that will be considered as final report. Defective books mentioned in PLI shall be replaced in time. Inspection agent will quantify the defective and low quality textbooks. NCTB may reconfirm the test reports from govt. laboratory like BCSIR or BSTI to ensure the quality. (ii) A Committee will be formed including representatives of SHED, DSHE, NCTB and IA to justify quantity of low quality books. (iii) Low quality textbooks will be treated as undelivered goods. If the tenderer fails to supply 100% textbooks within the contract period and for that reason PLI is not completed within the stipulated time, in that case for the further PLI arranged, inspection cost will be paid by the supplier/tenderer which will be equal of the Inspection Agent's expenditure for that additional inspection.
TDS/PDS--C. Qualification Criteria--

Tenderer shall have a minimum of 02 (two) years of general experience.
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For each tender, tenderer must have the minimum specific experience individually in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed within the last 05 (five) years, each with a value of Tk. 12290000

[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]

For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment challan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/challan submission is not required.
ii) In case of NCTB’s work experience of academic year 2025, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.

The minimum supply and/or production capacity of goods is/ are:
1. The tenderer must have own sufficient machineries for cover printing and content printing, machineries for perfect/Auto Glue binding and UV of textbook laminating machine to execute the contract. No contractual printing machines will be considered. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine Size of Machine Color of Machine Capacity
(Per day)
 
1 Sheet Machine
(Cover Printing)
23"×36"/ above Bi color/4 color/ above color  
2 Web Machine (Content Printing) 20"×30" 4 color 400 reams
(For Four Color Content Printing)
3 Web Machine (Content Printing) 20"×30" 4 color 600 reams
(For Single Color Content Printing)
4 Web Machine (Content Printing) 20"×30" 1 color 600 reams
(For Single Color Content Printing)
5 Sheet Machine (Content Printing) 20"×30"/ above 4 color 80 reams
6 Sheet Machine (Content Printing) 20"×30"/ above 2 color 60 reams
7 Sheet Machine (Content Printing) 20"×30"/ above 1 color 60 reams
8 Auto Online Book Binding Machine (Gathering+Glue Binding+Cutting)     96000 books per day
9 Auto interleaf Machine (Only Gathering)     96000 books per day
10 Manual interleaf     7000 books per person per day
11 Auto Glue Binding Machine     2300 books per clam per day
12 Cutting Machine Three knife   96000 books per day
13 Cutting Machine One knife   32000 books per day
14 U.V (Ultra Varnish)     Must have minimum one machine
15 Auto bundle Machine     Must have minimum one machine
16 GSM weight balance machine with Cutter     Must have minimum one machine

                                                                  Table-1

2. A printing unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper Exccpt NCTB's Specification. 
3. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
4. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
5. Adequate toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
6. A printing unit shall have a set of computer with trained operator and all time internet connection.
7. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
8. Physical facilities of the tenderer shall be inspected by the TEC or NCTB's inspection committee. Tenderer must have to show each printing/binding machine in running condition with a sample printing and binding. Number of tender(s) will be awarded as per the machine capacity of the tenderers.
9. TEC will consider the latest performance report at the time of tender evaluation. If TEC does not satisfy a tenderer’s production capacity which is mentioned in the table-1, it may declare the tenderer non-responsive.
10. A tenderer’s 60 (Sixty) day’s production capacity (Printing, Binding and Cutting) will be considered as full capacity for tender evaluation.
(a) For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB. At the time of tender evaluation (by the concern TEC), occupied machines shall not be considered for another tender under the HOPE of NCTB. PE will supply unoccupied production capacity to TEC for tender evaluation.
 

Tenderer shall have a minimum of 02 (two) years of general experience.
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For each tender, tenderer must have the minimum specific experience individually in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed within the last 05 (five) years, each with a value of Tk 12290000

[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]

For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment challan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/challan submission is not required.
ii) In case of NCTB’s work experience of academic year 2025, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.

The minimum supply and/or production capacity of goods is/ are:
1. The tenderer must have own sufficient machineries for cover printing and content printing, machineries for perfect/Auto Glue binding and UV of textbook laminating machine to execute the contract. No contractual printing machines will be considered. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine Size of Machine Color of Machine Capacity
(Per day)
 
1 Sheet Machine
(Cover Printing)
23"×36"/ above Bi color/4 color/ above color  
2 Web Machine (Content Printing) 20"×30" 4 color 400 reams
(For Four Color Content Printing)
3 Web Machine (Content Printing) 20"×30" 4 color 600 reams
(For Single Color Content Printing)
4 Web Machine (Content Printing) 20"×30" 1 color 600 reams
(For Single Color Content Printing)
5 Sheet Machine (Content Printing) 20"×30"/ above 4 color 80 reams
6 Sheet Machine (Content Printing) 20"×30"/ above 2 color 60 reams
7 Sheet Machine (Content Printing) 20"×30"/ above 1 color 60 reams
8 Auto interleaf Machine (Only Gathering)     80000 books per day
9 Manual interleaf     5000 books per person per day
10 Auto Glue Binding Machine     2500 books per clam per day
11 Cutting Machine     Must have minimum one machine
12 U.V (Ultra Varnish)     Must have minimum one machine
13 Auto bundle Machine     Must have minimum one machine
14 GSM weight balance machine with Cutter     Must have minimum one machine

                                                                  Table-1

2. A printing unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper Exccpt NCTB's Specification. 
3. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
4. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
5. Adequate toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
6. A printing unit shall have a set of computer with trained operator and all time internet connection.
7. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
8. Physical facilities of the tenderer shall be inspected by the TEC or NCTB's inspection committee. Tenderer must have to show each printing/binding machine in running condition with a sample printing and binding. Number of tender(s) will be awarded as per the machine capacity of the tenderers.
9. TEC will consider the latest performance report at the time of tender evaluation. If TEC does not satisfy a tenderer’s production capacity which is mentioned in the table-1, it may declare the tenderer non-responsive.
10. A tenderer’s 60 (Sixty) day’s production capacity (Printing, Binding and Cutting) will be considered as full capacity for tender evaluation.
(a) For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB. At the time of tender evaluation (by the concern TEC), occupied machines shall not be considered for another tender under the HOPE of NCTB. PE will supply unoccupied production capacity to TEC for tender evaluation.
 

TDS/PDS--D. Tender Preparation--

The Tenderer shall submit with its Tender the following additional documents:
1. Copy of individual Press Declaration for each unit or Press Declaration mentioning each unit (In case of address change of the press or unit of the press, received copy of application to appropriate authority mentioning the change of address will be accepted).
2. Ownership document of printing press.
3. Updated Trade License for each unit or Updated Trade License mentioning each unit.
4. Latest Tax payment certificate mentioning proprietorship of the Tenderer.
5. VAT registration certificate
6. List of permanent staffs.
7. List of manual interleaf staffs.
8. All unit address and unit wise list of machineries for printing, interleaf, cutting, binding, bundling, etc.
9. Certificate issued by the concern bank stating that the applicant is not in default of debt according to CIB report of Bangladesh Bank.
 

The Tenderer shall submit with its Tender the following additional documents:
1. Copy of individual Press Declaration for each unit or Press Declaration mentioning each unit.
(In case of address change of the press or unit of the press, received copy of application to appropriate authority mentioning the change of address will be accepted).
2. Updated Trade License for each unit or Updated Trade License mentioning each unit.
3. Latest Tax payment certificate mentioning proprietorship of the tenderer.
4. VAT registration certificate
5. List of permanent staffs.
6. List of manual interleaf staffs.
7. All unit address and unit wise list of machineries for printing, interleaf, cutting, binding, bundling, etc.
8. Certificate issued by the concern bank stating that the applicant is not in default of debt according to CIB report of Bangladesh Bank.
 

 Amendment / Corrigendum No. :  2 
Amendment / Corrigendum Text :

Update Notice

Field Name Old Value New Value
Document last selling date & time 26/05/2025 17:00 01/06/2025 17:00
Opening Date & Time 27/05/2025 14:00 02/06/2025 14:00
Last date & time for Tender/Proposal Security Submission 27/05/2025 13:00 02/06/2025 13:00
Closing Date & Time 27/05/2025 14:00 02/06/2025 14:00
 Amendment / Corrigendum No. :  1 
Amendment / Corrigendum Text :

Updated TDS

Field Name Old Value New Value
Eligibility of Consultant

As Per TDS

As Per TDS

PCC 18. Scope of Supply
18.1Scope of Supply

Scope of Supply
The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbook. Within first 25 days of the total contract days, tenderer must deliver 20% of the total deliverable/contract products, within next 25 days of the total contract days, tenderer must deliver 40% of the total deliverable/contract products excluding previous 20% and the rest 40% of the contract products shall be delivered within next 20 days. If tenderer fails to deliver 60% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, tenderer must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory in specified scheduled time, PE has the right to terminate the contract immediately and also right to forfeit the performance security.
The method and conditions of payment to be made as follows: i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) The tenderer shall submit bill to Procuring Entity after completing the task as mentioned in the contract. b) If supplier delivers 60% of the contract goods within specified time then 80% payment of delivered goods in good condition will be paid by NCTB upon challan received from respective destination through NCTB's web application as well as printed copy. (c) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after receiving challan from the respective DEO/USEO/TSEO and PDI report & ERC report. (d) Remaining 20% payment shall be paid after receiving the Post Landing Inspection (PLI) report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. Any defective textbook is found in PLI report, tenderer must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. Final payment will be settled subject to resolve all claims. (e) Tenderer shall submit bill for individual tender including 1 (one) set of download copy of approved challan by respective DEO/USEO/TSEO and 2 (two) sets photocopy of the same challan. Payment will be made within the short time on receipt of bill along with approved challan & ERC Report from NCTB. (f) If the number of forma (of textbooks) increase or decrease, the quoted price may be increased or decreased. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times.
Scope of Supply
The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbook. Within first 25 days of the total contract days, tenderer must PDI 20% of the total deliverable/contract products, within next 25 days of the total contract days, tenderer must deliver 60% of the total deliverable/contract products including previous 20% and the rest 40% of the contract products shall be delivered within next 20 days. If tenderer fails to deliver 60% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, tenderer must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory in specified scheduled time, PE has the right to terminate the contract immediately and also right to forfeit the performance security.
The method and conditions of payment to be made as follows: i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) The tenderer shall submit bill to Procuring Entity after completing the task as mentioned in the contract. b) If supplier delivers 60% of the contract goods within specified time then 80% payment of delivered goods in good condition will be paid by NCTB upon challan received from respective destination through NCTB's web application as well as printed copy. (c) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after receiving challan from the respective DEO/USEO/TSEO and PDI report & ERC report. (d) Remaining 20% payment shall be paid after receiving the Post Landing Inspection (PLI) report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. Any defective textbook is found in PLI report, tenderer must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. Final payment will be settled subject to resolve all claims. (e) Tenderer shall submit bill for individual tender including 1 (one) set of download copy of approved challan by respective DEO/USEO/TSEO and 2 (two) sets photocopy of the same challan. Payment will be made within the short time on receipt of bill along with approved challan & ERC Report from NCTB. (f) If the number of forma (of textbooks) increase or decrease, the quoted price may be increased or decreased. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times.
TDS/PDS--C. Qualification Criteria--

Tenderer shall have a minimum of 02 (two) years of general experience.
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For each tender, tenderer must have the minimum specific experience individually in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed within the last 05 (five) years, each with a value of Tk. 12290000

[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]

For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment challan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/challan submission is not required.
ii) In case of NCTB’s work experience of academic year 2025, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.

The minimum supply and/or production capacity of goods is/ are:
1. The tenderer must have own sufficient machineries for cover printing and content printing, machineries for perfect/Auto Glue binding and UV of textbook laminating machine to execute the contract. No contractual printing machines will be considered. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine Size of Machine Color of Machine Capacity
(Per day)
 
1 Sheet Machine
(Cover Printing)
23"×36"/ above Bi color/4 color/ above color  
2 Web Machine (Content Printing) 20"×30" 4 color 400 reams
(For Four Color Content Printing)
3 Web Machine (Content Printing) 20"×30" 4 color 600 reams
(For Single Color Content Printing)
4 Web Machine (Content Printing) 20"×30" 1 color 600 reams
(For Single Color Content Printing)
5 Sheet Machine (Content Printing) 20"×30"/ above 4 color 80 reams
6 Sheet Machine (Content Printing) 20"×30"/ above 2 color 60 reams
7 Sheet Machine (Content Printing) 20"×30"/ above 1 color 60 reams
8 Auto interleaf Machine     120000 books per day
9 Manual interleaf     7000 books per person per day
10 Auto Glue Binding Machine     2000 books per clam per day
11 Cutting Machine Three knife   120000 books per day
12 Cutting Machine One knife   40000 books per day
13 U.V (Ultra Varnish)     Must have minimum one machine
14 Auto bundle Machine     Must have minimum one machine
15 GSM weight balance machine with Cutter     Must have minimum one machine

                                                                  Table-1

2. A printing unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper Exccpt NCTB's Specification. 
3. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
4. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
5. Adequate toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
6. A printing unit shall have a set of computer with trained operator and all time internet connection.
7. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
8. Physical facilities of the tenderer shall be inspected by the TEC or NCTB's inspection committee. Tenderer must have to show each printing/binding machine in running condition with a sample printing and binding. Number of tender(s) will be awarded as per the machine capacity of the tenderers.
9. TEC will consider the latest performance report at the time of tender evaluation. If TEC does not satisfy a tenderer’s production capacity which is mentioned in the table-1, it may declare the tenderer non-responsive.
10. A tenderer’s 60 (Sixty) day’s production capacity (Printing, Binding and Cutting) will be considered as full capacity for tender evaluation.
(a) For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB. At the time of tender evaluation (by the concern TEC), occupied machines shall not be considered for another tender under the HOPE of NCTB. PE will supply unoccupied production capacity to TEC for tender evaluation.
 

Tenderer shall have a minimum of 02 (two) years of general experience.
[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]
For each tender, tenderer must have the minimum specific experience individually in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed within the last 05 (five) years, each with a value of Tk. 12290000

[Years counting backward from the date of publication of IFT in the newspaper/e-gp system.]

For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) payment challan in support of the amount mentioned in the experience certificate. But in case of NCTB’s work experience VAT or income tax certificate/challan submission is not required.
ii) In case of NCTB’s work experience of academic year 2025, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.

The minimum supply and/or production capacity of goods is/ are:
1. The tenderer must have own sufficient machineries for cover printing and content printing, machineries for perfect/Auto Glue binding and UV of textbook laminating machine to execute the contract. No contractual printing machines will be considered. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine Size of Machine Color of Machine Capacity
(Per day)
 
1 Sheet Machine
(Cover Printing)
23"×36"/ above Bi color/4 color/ above color  
2 Web Machine (Content Printing) 20"×30" 4 color 400 reams
(For Four Color Content Printing)
3 Web Machine (Content Printing) 20"×30" 4 color 600 reams
(For Single Color Content Printing)
4 Web Machine (Content Printing) 20"×30" 1 color 600 reams
(For Single Color Content Printing)
5 Sheet Machine (Content Printing) 20"×30"/ above 4 color 80 reams
6 Sheet Machine (Content Printing) 20"×30"/ above 2 color 60 reams
7 Sheet Machine (Content Printing) 20"×30"/ above 1 color 60 reams
8 Auto Online Book Binding Machine (Gathering+Glue Binding+Cutting)     96000 books per day
9 Auto interleaf Machine (Only Gathering)     96000 books per day
10 Manual interleaf     7000 books per person per day
11 Auto Glue Binding Machine     2300 books per clam per day
12 Cutting Machine Three knife   96000 books per day
13 Cutting Machine One knife   32000 books per day
14 U.V (Ultra Varnish)     Must have minimum one machine
15 Auto bundle Machine     Must have minimum one machine
16 GSM weight balance machine with Cutter     Must have minimum one machine

                                                                  Table-1

2. A printing unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper Exccpt NCTB's Specification. 
3. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
4. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
5. Adequate toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
6. A printing unit shall have a set of computer with trained operator and all time internet connection.
7. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
8. Physical facilities of the tenderer shall be inspected by the TEC or NCTB's inspection committee. Tenderer must have to show each printing/binding machine in running condition with a sample printing and binding. Number of tender(s) will be awarded as per the machine capacity of the tenderers.
9. TEC will consider the latest performance report at the time of tender evaluation. If TEC does not satisfy a tenderer’s production capacity which is mentioned in the table-1, it may declare the tenderer non-responsive.
10. A tenderer’s 60 (Sixty) day’s production capacity (Printing, Binding and Cutting) will be considered as full capacity for tender evaluation.
(a) For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB. At the time of tender evaluation (by the concern TEC), occupied machines shall not be considered for another tender under the HOPE of NCTB. PE will supply unoccupied production capacity to TEC for tender evaluation.
 

TDS/PDS--D. Tender Preparation--

The Tenderer shall submit with its Tender the following additional documents:
1. Copy of individual Press Declaration for each unit or Press Declaration mentioning each unit.
2. Ownership document of printing press.
3. Updated Trade License for each unit or Updated Trade License mentioning each unit.
4. Latest Tax payment certificate mentioning proprietorship of the Tenderer.
5. VAT registration certificate
6. List of permanent staffs.
7. List of manual interleaf staffs.
8. All unit address and unit wise list of machineries for printing, interleaf, cutting, binding, bundling, etc.
9. Certificate issued by the concern bank stating that the applicant is not in default of debt according to CIB report of Bangladesh Bank.
 

The Tenderer shall submit with its Tender the following additional documents:
1. Copy of individual Press Declaration for each unit or Press Declaration mentioning each unit (In case of address change of the press or unit of the press, received copy of application to appropriate authority mentioning the change of address will be accepted).
2. Ownership document of printing press.
3. Updated Trade License for each unit or Updated Trade License mentioning each unit.
4. Latest Tax payment certificate mentioning proprietorship of the Tenderer.
5. VAT registration certificate
6. List of permanent staffs.
7. List of manual interleaf staffs.
8. All unit address and unit wise list of machineries for printing, interleaf, cutting, binding, bundling, etc.
9. Certificate issued by the concern bank stating that the applicant is not in default of debt according to CIB report of Bangladesh Bank.
 

Brief Description of Goods,Works or Service

For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026.

For Printing (with paper), Binding and Supplying of textbooks of Secondary (Bangla & English Version), Dakhil, and Technical Class-6 to be distributed free of cost for the Academic Year 2026.

 
Save As PDF