| PCC 18. Scope of Supply18.1Scope of Supply
|
| Scope of Supply |
|---|
| The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbooks. All textbooks will be 80 GSM and four color as specified in technical specification. Total time 70 Days from the contract signing. Within first 40 days of the total contract days tenderer must deliver 50% of the total deliverable/contract products and the rest 50% of the contract products shall be delivered within next 30 days. If tenderer fails to deliver first 50% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory within the contract period. PE has the right to terminate the contract immediately and also right to forfeit the performance security. The printer/supplier will have to submit 01 set of Textbook of Primary for every Zilla/Upazilla as sample copy signed by Member (textbook)/ Production Controller/ Deputy Production Controller, submit 01 set of Textbook of Primary for DPE and 05 set of Textbook of Primary for NCTB for official work. | | i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) if supplier delivers 50% of the contract goods within specified time then 80% payment of first 50% delivered goods will be paid by NCTB upon chalan received from respective destination through NCTB's prescribed chalan as well as printed copy as per delivery schedule. (b) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after approving the chalan from the respective DPEO/UEO/TEO/Authorized personnel and PDI report from the appointed Inspection Agent. (c) Remaining 20% payment shall be paid after receiving the PLI report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. After getting PLI report if any defective textbook is found, supplier must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within the time, it will be treated as undelivered goods and LD will be applicable. Final payment will be settled subject to resolve all claims. (d) Textbook supply will not be accepted by Upazilla/Dist/Central Store without challan as prescribed by NCTB. The tenderer/supplier shall submit 6 (Six) copies challan to the respective divisional DD/ DPEO/UEO/TEO/Authorized personnel. Concerned Official(s) of the Division/ District/ Upazilla/ Thana warehouse will keep 3 (Three) copies and return 3 (Three) copies to the tenderer having duly certified that the Textbooks have been received in subject to verification by inspection agent. A copy of the Challan should be submitted to press Monitoring Officer of DPE immediate after receiving of the Textbook by the respective Press Authority. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times. | |
| Scope of Supply |
|---|
| The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbooks. All textbooks will be 80 GSM and four color as specified in technical specification. Total time 70 Days from the contract signing. Within first 40 days of the total contract days tenderer must deliver 50% of the total deliverable/contract products and the rest 50% of the contract products shall be delivered within next 30 days. If tenderer fails to deliver first 50% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory within the contract period. PE has the right to terminate the contract immediately and also right to forfeit the performance security. The printer/supplier will have to submit 01 set of Textbook of Primary for every Zilla/Upazilla as sample copy signed by Member (textbook)/ Production Controller/ Deputy Production Controller, submit 01 set of Textbook of Primary for DPE and 02 set of Textbook of Primary for NCTB for official work. | | i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) if supplier delivers 50% of the contract goods within specified time then 80% payment of first 50% delivered goods will be paid by NCTB upon chalan received from respective destination through NCTB's prescribed chalan as well as printed copy as per delivery schedule. (b) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after approving the chalan from the respective DPEO/UEO/TEO/Authorized personnel and PDI report from the appointed Inspection Agent. (c) Remaining 20% payment shall be paid after receiving the PLI report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. After getting PLI report if any defective textbook is found, supplier must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within the time, it will be treated as undelivered goods and LD will be applicable. Final payment will be settled subject to resolve all claims. (d) Textbook supply will not be accepted by Upazilla/Dist/Central Store without challan as prescribed by NCTB. The tenderer/supplier shall submit 6 (Six) copies challan to the respective divisional DD/ DPEO/UEO/TEO/Authorized personnel. Concerned Official(s) of the Division/ District/ Upazilla/ Thana warehouse will keep 3 (Three) copies and return 3 (Three) copies to the tenderer having duly certified that the Textbooks have been received in subject to verification by inspection agent. A copy of the Challan should be submitted to press Monitoring Officer of DPE immediate after receiving of the Textbook by the respective Press Authority. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times. | |
| TDS/PDS--C. Qualification Criteria--
|
a) A minimum of years of general of the tenderer in the supply of goods and related service as supplier shall be 02 (Two) years.
Years counting backward from the date of publication of IFT in the e-GP System]
(b) The minimum Specific experience supplier in supply of similar goods of at least 02 (Two) contract (s) successfully completed within the last 05 (Five years, each with a value of at last Taka : 18567000
Years counting backward from the date of publication of IFT in the e-GP System
For the proof of valid experience certificate tenderer must submit the following documents;
i) Tenderer must provide VAT(if applicable) and income Tax (IT) payment Chelan in support of amount mentioned in the experience certificate, But in case of NCTB’s work experience Vat or income tax certificate/chalan submission is not required.
ii) In case of NCTB’s work experience, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.
(c) A minimum supply and/or production capacity of Goods is/are ;
i. The Tenderer must have own sufficient machineries for Cover printing, Text printing of Primary level Textbooks. Required machineries and production capacity to execute the contract are given bellow:
|
Sl No |
Name of Machine |
Size of Machine |
Color of Machine |
Capacity
(Per day)
|
|
1 |
Sheet Machine
(Cover Printing) |
23"×36"/ above |
Bi color/4 color/ above color |
|
|
2 |
Web Machine (Content Printing) |
20"×30" |
4 color |
400 reams
(For Four Color Content Printing) |
|
3 |
Sheet Machine (Content Printing) |
20"×30"/ above |
4 color |
80 reams |
|
4 |
Auto interleaf Machine |
|
|
80000 books per day |
|
5 |
Manual interleaf |
|
|
5000 books per person per day |
|
6 |
Auto Glue Binding Machine |
|
|
2500 books per clam per day |
|
7 |
Cutting Machine |
|
|
Must have minimum one machine |
|
8 |
U.V (Ultra Varnish) |
|
|
Must have minimum one machine |
|
9 |
Auto bundle Machine |
|
|
Must have minimum one machine |
|
10 |
GSM weight balance machine with Cutter |
|
|
Must have minimum one machine |
Table-1
Tenderer is not considered without having the above own machineries.
ii. The minimum production capacity of printing and Auto binding machineries of textbooks shall be 100% in quantity of goods of proposed contract within 60 days and it will be verified before final evaluation.
Address of the printing and binding section of the press must be mentioned in the tender document and the printing and binding works must be done in that premises.
iii. A Printing Unit shall have a set of printing machineries along with all equipment’s (binding, UV lamination, cutting, bundling, etc.) to furnish a set of complete Textbooks in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper except NCTB`s Specification.
iv. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
v. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
vi. Adequate Toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
vii. A printing unit shall have a set of computer with trained operator and all time internet connection.
viii. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
ix. Physical facilities of the tenderer shall be inspected by the TEC or NCTB’s inspection committee. At the time of post evaluation, tenderer must have to ensure that each of the printing machines, Auto Glue binding machines, U.V (Ultra Varnish) laminating machines and cutting machines are working properly and in good condition. Printing and binding capacity of the tenderer would be calculated only on the basis of the physical inspection report of the said committee.
Note: Printing & Binding Capacity Determination:
For smooth production (printing, binding & supplying activities) in Primary and Secondary level, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB.
N.B: At the time of tender evaluation occupied machine (by the concern TEC) shall not be considered for another tender (Lots).
Printing Status:
If the Procuring Entity (PE)/DPE understands/assumes that the printer is failed or is not able to supply the Textbooks within the stipulated time/period as per contract, the PE/DPE will take necessary action/arrangement against printers in order to ensure printing and supply of the Textbooks in whole or part of the awarded quantity from any other sources as per the provisions of PPR and PPA. In that case the PE/DPE may not be receiving the rest quantity of the Textbook from the suppliers/printers. |
a) A minimum of years of general of the tenderer in the supply of goods and related service as supplier shall be 02 (Two) years.
Years counting backward from the date of publication of IFT in the e-GP System]
(b) The minimum Specific experience supplier in supply of similar goods of at least 02 (Two) contract (s) successfully completed within the last 05 (Five years, each with a value of at last Taka : 17536000
Years counting backward from the date of publication of IFT in the e-GP System
For the proof of valid experience certificate tenderer must submit the following documents;
i) Tenderer must provide VAT(if applicable) and income Tax (IT) payment Chelan in support of amount mentioned in the experience certificate, But in case of NCTB’s work experience Vat or income tax certificate/chalan submission is not required.
ii) In case of NCTB’s work experience, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.
(c) A minimum supply and/or production capacity of Goods is/are ;
i. The Tenderer must have own sufficient machineries for Cover printing, Text printing of Primary level Textbooks. Required machineries and production capacity to execute the contract are given bellow:
|
Sl No |
Name of Machine |
Size of Machine |
Color of Machine |
Capacity
(Per day)
|
|
1 |
Sheet Machine
(Cover Printing) |
23"×36"/ above |
Bi color/4 color/ above color |
|
|
2 |
Web Machine (Content Printing) |
20"×30" |
4 color |
400 reams
(For Four Color Content Printing) |
|
3 |
Sheet Machine (Content Printing) |
20"×30"/ above |
4 color |
80 reams |
|
4 |
Auto interleaf Machine |
|
|
80000 books per day |
|
5 |
Manual interleaf |
|
|
5000 books per person per day |
|
6 |
Auto Glue Binding Machine |
|
|
2500 books per clam per day |
|
7 |
Cutting Machine |
|
|
Must have minimum one machine |
|
8 |
U.V (Ultra Varnish) |
|
|
Must have minimum one machine |
|
9 |
Auto bundle Machine |
|
|
Must have minimum one machine |
|
10 |
GSM weight balance machine with Cutter |
|
|
Must have minimum one machine |
Table-1
Tenderer is not considered without having the above own machineries.
ii. The minimum production capacity of printing and Auto binding machineries of textbooks shall be 100% in quantity of goods of proposed contract within 60 days and it will be verified before final evaluation.
Address of the printing and binding section of the press must be mentioned in the tender document and the printing and binding works must be done in that premises.
iii. A Printing Unit shall have a set of printing machineries along with all equipment’s (binding, UV lamination, cutting, bundling, etc.) to furnish a set of complete Textbooks in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper except NCTB`s Specification.
iv. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
v. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
vi. Adequate Toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
vii. A printing unit shall have a set of computer with trained operator and all time internet connection.
viii. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
ix. Physical facilities of the tenderer shall be inspected by the TEC or NCTB’s inspection committee. At the time of post evaluation, tenderer must have to ensure that each of the printing machines, Auto Glue binding machines, U.V (Ultra Varnish) laminating machines and cutting machines are working properly and in good condition. Printing and binding capacity of the tenderer would be calculated only on the basis of the physical inspection report of the said committee.
Note: Printing & Binding Capacity Determination:
For smooth production (printing, binding & supplying activities) in Primary and Secondary level, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB.
N.B: At the time of tender evaluation occupied machine (by the concern TEC) shall not be considered for another tender (Lots).
Printing Status:
If the Procuring Entity (PE)/DPE understands/assumes that the printer is failed or is not able to supply the Textbooks within the stipulated time/period as per contract, the PE/DPE will take necessary action/arrangement against printers in order to ensure printing and supply of the Textbooks in whole or part of the awarded quantity from any other sources as per the provisions of PPR and PPA. In that case the PE/DPE may not be receiving the rest quantity of the Textbook from the suppliers/printers.
|