View IFT /PQ / REOI / RFP / PPS Notice Details
Ministry : Ministry of Education Division : Secondary and Higher Education Division
Organization : National Curriculum and textbook Board (NCTB) Procuring Entity Name : Member (Textbook), NCTB
Procuring Entity Code : Procuring Entity District : Dhaka
Procurement Nature : Goods Procurement Type : NCT
Event Type : Invitation for : Tender - Single Lot
Invitation Reference No. : 37.06.0000.304.07.377.25/3256 Tender/Proposal Status :
App ID : 213458 Tender/Proposal ID : 1126704
Key Information and Funding Information :
Procurement Method : Open Tendering Method (OTM) Budget Type : Revenue
Source of Funds : Government
Particular Information :
Project Code : Not applicable Project Name : Not applicable
Tender/Proposal Package No. and Description : GD.98.PRI.4_5.450
For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes Four and Five to be distributed free of cost for the Academic Year 2026
Category : Various types of printed matter and articles for printing; Printing, publishing and related services;Printed books, brochures and leaflets;Printed books;Publications;Directories;Leaflets;Brochures;Booklets;Newspapers, journals, periodicals and magazines;Newspapers;Postcards, greeting cards and other printed matter;Postcards;Greeting cards;Stamps, cheque forms, banknotes, stock certificates, trade advertising material, catalogues and manuals;Stamps;Stamp-impressed paper;Banknotes;Cheque forms;Security-type printed matter;Trade-advertising material, commercial catalogues and manuals;Manuals;Printing plates or cylinders or other media for use in printing;Offset plates;Dry-etching equipment;Paper or paperboard registers, account books, binders, forms and other articles of printed stationery;Paper or paperboard registers;Forms;Exercise books;Albums for samples;Binders and related accessories;Printed stationery except forms;Miscellaneous printed matter;Car-tax discs;Driving licences;ID cards;Permits;Entrance cards;Bespoke printed matter;Tickets;Printing services;Printing services for books;Printing services for stationery;Printing services for security printed matter;Printing services for forms;Printing services for tickets;Printing services for calendars;Printing services for timetables;Newspaper printing services;Printing services for posters;Services related to printing;Print finishing services;Composition services;Printing and delivery services;Printing and distribution services;Publishing services;Bookbinding and finishing services;Subscription services
Scheduled Tender/Proposal Publication
Date and Time :
24-Jun-2025 09:00 Tender/Proposal Document last selling /
downloading Date and Time :
14-Jul-2025 17:00
Pre - Tender/Proposal meeting Start
Date and Time :
24-Jun-2025 10:00 Pre - Tender/Proposal meeting End
Date and Time :
03-Jul-2025 17:00
Tender/Proposal Closing
Date and Time :
15-Jul-2025 14:00 Tender/Proposal Opening
Date and Time :
15-Jul-2025 14:00
Last Date and Time for Tender/Proposal Security
Submission :
15-Jul-2025 13:00    
Information for Tenderer/Consultant :
Eligibility of Tenderer :

As per TDS

Brief Description of Goods and Related Service :

For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes Four and Five to be distributed free of cost for the Academic Year 2026

Evaluation Type : Lot wise
Document Available : Package wise
Document Fees : Package wise
Tender/Proposal Document Price (In BDT) : 4000
Mode of Payment :
Tender/Proposal Security Valid Up to : 10-Dec-2025
Tender/Proposal Valid Up to : 12-Nov-2025
Lot No. Identification of Lot Location Tender/Proposal security
(Amount in BDT)
Tentative Start Date Tentative Completion Date
450 For Printing (with Paper), Binding and Supplying of Primary Level Textbooks for Classes Four and Five to be distributed free of cost for the Academic Year 2026 As per Delivery Schedule 519000 18-Sep-2025 27-Nov-2025
Procuring Entity Details:
Name of Official Inviting Tender/Proposal : Muhammad Fatihul Quadir Designation of Official Inviting Tender/Proposal : Member (Textbook)
Address of Official Inviting Tender/Proposal :
Address: 69-70, Motijheel, C/A, Dhaka-1000
City: Dhaka
Thana: Dhamrai
District: Dhaka - 1000
Country: Bangladesh
Contact details of Official Inviting Tender/Proposal :
Phone No: 02-9550805
Fax No:
The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs
Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.
Documents
Amendment / Corrigendum Detail
 Amendment / Corrigendum No. :  1 
Amendment / Corrigendum Text :

UPDATE TDS

Field Name Old Value New Value
PCC 18. Scope of Supply
18.1Scope of Supply

Scope of Supply
The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbooks. All textbooks will be 80 GSM and four color as specified in technical specification. Total time 70 Days from the contract signing. Within first 40 days of the total contract days tenderer must deliver 50% of the total deliverable/contract products and the rest 50% of the contract products shall be delivered within next 30 days. If tenderer fails to deliver first 50% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory within the contract period. PE has the right to terminate the contract immediately and also right to forfeit the performance security. The printer/supplier will have to submit 01 set of Textbook of Primary for every Zilla/Upazilla as sample copy signed by Member (textbook)/ Production Controller/ Deputy Production Controller, submit 01 set of Textbook of Primary for DPE and 05 set of Textbook of Primary for NCTB for official work.
i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) if supplier delivers 50% of the contract goods within specified time then 80% payment of first 50% delivered goods will be paid by NCTB upon chalan received from respective destination through NCTB's prescribed chalan as well as printed copy as per delivery schedule. (b) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after approving the chalan from the respective DPEO/UEO/TEO/Authorized personnel and PDI report from the appointed Inspection Agent. (c) Remaining 20% payment shall be paid after receiving the PLI report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. After getting PLI report if any defective textbook is found, supplier must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within the time, it will be treated as undelivered goods and LD will be applicable. Final payment will be settled subject to resolve all claims. (d) Textbook supply will not be accepted by Upazilla/Dist/Central Store without challan as prescribed by NCTB. The tenderer/supplier shall submit 6 (Six) copies challan to the respective divisional DD/ DPEO/UEO/TEO/Authorized personnel. Concerned Official(s) of the Division/ District/ Upazilla/ Thana warehouse will keep 3 (Three) copies and return 3 (Three) copies to the tenderer having duly certified that the Textbooks have been received in subject to verification by inspection agent. A copy of the Challan should be submitted to press Monitoring Officer of DPE immediate after receiving of the Textbook by the respective Press Authority. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times.
Scope of Supply
The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section. To ensure smooth production, the tenderer has to collect the CD (Soft Copy) of textbooks from the Education and Editorial Section of NCTB and to submit 03 (three) copies of 04 (four) color printed copy as sample to same section of NCTB. Four color cover printing shall be done for all textbooks. All textbooks will be 80 GSM and four color as specified in technical specification. Total time 70 Days from the contract signing. Within first 40 days of the total contract days tenderer must deliver 50% of the total deliverable/contract products and the rest 50% of the contract products shall be delivered within next 30 days. If tenderer fails to deliver first 50% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. PE has also the right to terminate the contract (if necessary). If a tenderer is awarded for multiple tenders, must comply each tender delivery schedule individually. If tenderer's production and delivery is not satisfactory within the contract period. PE has the right to terminate the contract immediately and also right to forfeit the performance security. The printer/supplier will have to submit 01 set of Textbook of Primary for every Zilla/Upazilla as sample copy signed by Member (textbook)/ Production Controller/ Deputy Production Controller, submit 01 set of Textbook of Primary for DPE and 02 set of Textbook of Primary for NCTB for official work.
i) Advance payment: Not applicable ii) Payment on delivery and acceptance: (a) if supplier delivers 50% of the contract goods within specified time then 80% payment of first 50% delivered goods will be paid by NCTB upon chalan received from respective destination through NCTB's prescribed chalan as well as printed copy as per delivery schedule. (b) 80% payment of the contract price shall be made upon 100% delivery of the textbooks to respective destination in good condition after approving the chalan from the respective DPEO/UEO/TEO/Authorized personnel and PDI report from the appointed Inspection Agent. (c) Remaining 20% payment shall be paid after receiving the PLI report from Inspection Agent appointed by PE. If necessary, authority may arrange further inspection by nominated NCTB officials. After getting PLI report if any defective textbook is found, supplier must replace defective textbook within 15 (Fifteen) days. If tenderer fails to deliver defective textbook within the time, it will be treated as undelivered goods and LD will be applicable. Final payment will be settled subject to resolve all claims. (d) Textbook supply will not be accepted by Upazilla/Dist/Central Store without challan as prescribed by NCTB. The tenderer/supplier shall submit 6 (Six) copies challan to the respective divisional DD/ DPEO/UEO/TEO/Authorized personnel. Concerned Official(s) of the Division/ District/ Upazilla/ Thana warehouse will keep 3 (Three) copies and return 3 (Three) copies to the tenderer having duly certified that the Textbooks have been received in subject to verification by inspection agent. A copy of the Challan should be submitted to press Monitoring Officer of DPE immediate after receiving of the Textbook by the respective Press Authority. N.B: Partial payment & partial delivery are allowed. However partial bill will not pay more than two times.
TDS/PDS--C. Qualification Criteria--

a) A minimum of years of general of the tenderer in the supply of goods and related service as supplier shall be 02 (Two) years.
Years counting backward from the date of publication of IFT in the e-GP System]

(b) The minimum Specific experience supplier in supply of similar goods of at least 02 (Two) contract (s) successfully completed within the last 05 (Five years, each with a value of at last Taka :  16,681,000

 

Years counting backward from the date of publication of IFT in the e-GP System
For the proof of valid experience certificate tenderer must submit the following documents;
i) Tenderer must provide VAT(if applicable) and income Tax (IT) payment Chelan in support of amount mentioned in the experience certificate, But in case of NCTB’s work experience Vat or income tax certificate/chalan submission is not required.
ii) In case of NCTB’s work experience, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.

 (c) A minimum supply and/or production capacity of Goods is/are ;

i. The Tenderer must have own sufficient machineries for Cover printing, Text printing of Primary level Textbooks. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine Size of Machine Color of Machine Capacity
(Per day)
 
1 Sheet Machine
(Cover Printing)
23"×36"/ above Bi color/4 color/ above color  
2 Web Machine (Content Printing) 20"×30" 4 color 400 reams
(For Four Color Content Printing)
3 Sheet Machine (Content Printing) 20"×30"/ above 4 color 80 reams
4 Auto interleaf Machine     80000 books per day
5 Manual interleaf     5000 books per person per day
6 Auto Glue Binding Machine     2500 books per clam per day
7 Cutting Machine     Must have minimum one machine
8 U.V (Ultra Varnish)     Must have minimum one machine
9 Auto bundle Machine     Must have minimum one machine
10 GSM weight balance machine with Cutter     Must have minimum one machine

                                                            Table-1

Tenderer is not considered without having the above own machineries.

ii. The minimum production capacity of printing and Auto binding machineries of textbooks shall be 100% in quantity of goods of proposed contract within 60 days and it will be verified before final evaluation.
Address of the printing and binding section of the press must be mentioned in the tender document and the printing and binding works must be done in that premises.
iii. A Printing Unit shall have a set of printing machineries along with all equipment’s (binding, UV lamination, cutting, bundling, etc.) to furnish a set of complete Textbooks in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper except NCTB`s Specification.
iv. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
v. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
vi. Adequate Toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
vii. A printing unit shall have a set of computer with trained operator and all time internet connection.
viii. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
ix. Physical facilities of the tenderer shall be inspected by the TEC or NCTB’s inspection committee. At the time of post evaluation, tenderer must have to ensure that each of the printing machines, Auto Glue binding machines, U.V (Ultra Varnish) laminating machines and cutting machines are working properly and in good condition. Printing and binding capacity of the tenderer would be calculated only on the basis of the physical inspection report of the said committee.
Note: Printing & Binding Capacity Determination:
For smooth production (printing, binding & supplying activities) in Primary and Secondary level, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB.
N.B: At the time of tender evaluation occupied machine (by the concern TEC) shall not be considered for another tender (Lots).
Printing Status:
If the Procuring Entity (PE)/DPE understands/assumes that the printer is failed or is not able to supply the Textbooks within the stipulated time/period as per contract, the PE/DPE will take necessary action/arrangement against printers in order to ensure printing and supply of the Textbooks in whole or part of the awarded quantity from any other sources as per the provisions of PPR and PPA. In that case the PE/DPE may not be receiving the rest quantity of the Textbook from the suppliers/printers.

a) A minimum of years of general of the tenderer in the supply of goods and related service as supplier shall be 02 (Two) years.
Years counting backward from the date of publication of IFT in the e-GP System]

(b) The minimum Specific experience supplier in supply of similar goods of at least 02 (Two) contract (s) successfully completed within the last 05 (Five years, each with a value of at last Taka :  1,57,54,000

 

Years counting backward from the date of publication of IFT in the e-GP System
For the proof of valid experience certificate tenderer must submit the following documents;
i) Tenderer must provide VAT(if applicable) and income Tax (IT) payment Chelan in support of amount mentioned in the experience certificate, But in case of NCTB’s work experience Vat or income tax certificate/chalan submission is not required.
ii) In case of NCTB’s work experience, work experience certificate (s) as well as NOA is also acceptable. NCTB will verify NOA (Notification of Award) and will make sure whether the contract was successfully completed or not.

 (c) A minimum supply and/or production capacity of Goods is/are ;

i. The Tenderer must have own sufficient machineries for Cover printing, Text printing of Primary level Textbooks. Required machineries and production capacity to execute the contract are given bellow:

 

Sl No Name of Machine Size of Machine Color of Machine Capacity
(Per day)
 
1 Sheet Machine
(Cover Printing)
23"×36"/ above Bi color/4 color/ above color  
2 Web Machine (Content Printing) 20"×30" 4 color 400 reams
(For Four Color Content Printing)
3 Sheet Machine (Content Printing) 20"×30"/ above 4 color 80 reams
4 Auto interleaf Machine     80000 books per day
5 Manual interleaf     5000 books per person per day
6 Auto Glue Binding Machine     2500 books per clam per day
7 Cutting Machine     Must have minimum one machine
8 U.V (Ultra Varnish)     Must have minimum one machine
9 Auto bundle Machine     Must have minimum one machine
10 GSM weight balance machine with Cutter     Must have minimum one machine

                                                            Table-1

Tenderer is not considered without having the above own machineries.

ii. The minimum production capacity of printing and Auto binding machineries of textbooks shall be 100% in quantity of goods of proposed contract within 60 days and it will be verified before final evaluation.
Address of the printing and binding section of the press must be mentioned in the tender document and the printing and binding works must be done in that premises.
iii. A Printing Unit shall have a set of printing machineries along with all equipment’s (binding, UV lamination, cutting, bundling, etc.) to furnish a set of complete Textbooks in the same premises of minimum 3000 sqft and additional 800 sqft per printing machine. Multiple printing units are acceptable considering the above-mentioned criteria. In case of multiple printing units, the address of all printing units must be mentioned in the tender and the printing, binding cutting works must be done in that/those premises, if address not found which mentioned in the tender, PE has the right to terminate the contract and also has the right to revise the above-mentioned criteria (if necessary). Within the contract period supplier/tenderer must not use this place for any other printing works. Tenderer will not be allowed to store printing paper except NCTB`s Specification.
iv. Printers those who have one printing machine will not be awarded NoA for both primary and secondary at the same time.
v. Printers those who have more than one printing machine will dedicate minimum one machine for primary till to complete contract, if awarded for both primary and secondary at the same time.
vi. Adequate Toilet facilities with proper hygiene. A printing unit premises will be neat and clean and environment friendly.
vii. A printing unit shall have a set of computer with trained operator and all time internet connection.
viii. A printing unit shall have a set of active CCTV surveillance with internet connection and must provide view access of CCTV to PE.
ix. Physical facilities of the tenderer shall be inspected by the TEC or NCTB’s inspection committee. At the time of post evaluation, tenderer must have to ensure that each of the printing machines, Auto Glue binding machines, U.V (Ultra Varnish) laminating machines and cutting machines are working properly and in good condition. Printing and binding capacity of the tenderer would be calculated only on the basis of the physical inspection report of the said committee.
Note: Printing & Binding Capacity Determination:
For smooth production (printing, binding & supplying activities) in Primary and Secondary level, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the HOPE of NCTB.
N.B: At the time of tender evaluation occupied machine (by the concern TEC) shall not be considered for another tender (Lots).
Printing Status:
If the Procuring Entity (PE)/DPE understands/assumes that the printer is failed or is not able to supply the Textbooks within the stipulated time/period as per contract, the PE/DPE will take necessary action/arrangement against printers in order to ensure printing and supply of the Textbooks in whole or part of the awarded quantity from any other sources as per the provisions of PPR and PPA. In that case the PE/DPE may not be receiving the rest quantity of the Textbook from the suppliers/printers.

TDS/PDS--C. Qualification Criteria--

The minimum amount of liquid assets i.e. working capital or unconditional credit line(s), net of other contractual commitments is Tk.  15,754,000
 

The minimum amount of liquid assets i.e. working capital or unconditional credit line(s), net of other contractual commitments is Tk.  1,66,81,000
 

 
Save As PDF