| Field Name |
Old Value |
New Value |
| Document last selling date & time
|
28/06/2020 16:00 |
02/07/2020 16:00 |
| Opening Date & Time
|
28/06/2020 16:30 |
02/07/2020 16:30 |
| PCC--.--
|
The period of validity of the Warranty shall be : [ insert the period of validity of the warranty] |
Warranty: Three Years, declared by Tenderer Pad
*Spares have to be installed with AAS Graphite Furnace by the Tender owner.
|
| PCC--.--
|
The documents to be furnished by the Supplier shall be as follows:
[insert the detail requirements of documents]
The documents to be furnished by the Supplier as follows:
a. Copies of Supplier’s invoice showing goods’ description, quantity, unit price, total amount;
b. Supplier’s warranty certificate (if any);
[Note: The above requirements should be reviewed by a Procuring Entity on a case-by-case basis, with amendments being made as necessary.] |
The documents to be furnished by the Supplier shall be as follows: (AS Per TDS clause 10
The documents to be furnished by the Supplier as follows:
a. Copies of Supplier’s invoice showing goods’ description, quantity, unit price, total amount;
b. Supplier’s warranty certificate Applicable for three years
[Note: The above requirements should be reviewed by a Procuring Entity on a case-by-case basis, with amendments being made as necessary.]
|
| Last date & time for Tender/Proposal Security Submission
|
28/06/2020 16:15 |
02/07/2020 16:15 |
| Closing Date & Time
|
28/06/2020 16:30 |
02/07/2020 16:30 |
| TDS/PDS--A. General--
|
Only Enlisted Tenders of the categories [state the categories] are eligible.
[in case of Open Tendering Method it will not be applicable]
|
Only Enlisted Tenders of the categories [state the categories] are eligible: Not applicable because this tender is an Open Tendering Method
[in case of Open Tendering Method it will not be applicable]
|
| TDS/PDS--B. Tender Document--
|
Allowed to post clarification till [Date and Time] |
Allowed to post clarification till Date: 25.06.2020 Time: 17.00
|
| TDS/PDS--C. Qualification Criteria--
|
The minimum amount of liquid assets, net of other contractual commitments, is Tk. [state value] |
The minimum amount of liquid assets, net of other contractual commitments, is Tk. 1.4 million BDT for this Single Lot
|
| TDS/PDS--D. Tender Preparation--
|
Tenderer shall submit with its e-Tender the following additional documents:
1. Country of Origin: USA/Uk/Germany or an equivalent
2. Warranty: 02 (Two) years and five years’ service warranty after the date of installation. Warrenty declared by TENDERER and supplier pad.
3. The tenderer shall have to collect and provide Manufacturer declaration of country of origin.
4. Must have to provide Calibration certificate.
5. The tender submitted company required at least 03 (three) years supply experience of laboratory equipment. The attested copy for the prove of mentioned experience should be attached with the tender application.
6. All Quality documents will be checked by visiting manufacturer website or via email.
7. The tender application must be cancelled if any condition of the tender is failed to assure
8. The successful tender applicant shall have to supply the goods within the mentioned time.
9. The bill of goods will be paid in terms of budget allotment.
10. The authority reserves all rights to receive less/more quantity of goods because of less/ more budget allotment.
11. The supplier should supply the goods with own responsibility and costs to the office of the Quality assurance Manager, quality control laboratory, department of fisheries, khulna in office time and according to package to the committee set by undersigned.
12. The bill shall be paid after deducted all taxes according to government law of Bangladesh.
13. The supplier should submit 03 (three) copies of bill after supplying the good according to supply-order.
14. For all queries regarding the specification and TDS condition, contract with the Procuring Entity within the pre tender/proposal meeting time frame as per notice, No queries shall be accepted after the proposal meeting time frame.
15. Bill shall be paid after successful installation of all equipment and spares.
16. The Tenderer must submit up to date Trade License, VAT Registration Certificate, NID card and Income Tax Certificate.
17. N/A
18. The bidder must have to mention the brand name, Model and country of origin of the Goods in the bidding process.
19. The tenderer must have to mention the detail technical specification of goods/ equipment’s/ instrument in the bidding process use of the term as per requirement/as per schedule will not be considered.
20. The tenderer shall have to attached the original Product catalogue those will be verify from manufacturer website or via email also tenderer responsibility to verified all document (Manufacturer authorization) within seven days during evaluation time. |
Tenderer shall submit with its e-Tender the following additional documents:
1. Country of Origin: USA/Uk/Germany or equivalent
2. Warranty: 02 (Two) years and five years’ service warranty after the date of installation. Warrenty declared by TENDERER and supplier pad.
3. The tenderer shall have to collect and provide Manufacturer declaration of country of origin.
4. Must have to provide Calibration certificate.
5. The tender submitted company required at least 03 (three) years supply experience of spare parts of similar laboratory analytical equipment. The attested copy for the prove of mentioned experience should be attached with the tender application.
6. All Quality documents will be checked by visiting manufacturer website or via email.
7. The tender application must be cancelled if any condition of the tender is failed to assure
8. The successful tender applicant shall have to supply the goods within the mentioned time.
9. The bill of goods will be paid in terms of budget allotment.
10. The authority reserves all rights to receive less/more quantity of goods because of less/ more budget allotment.
11. The supplier should supply the goods with own responsibility and costs to the office of the Quality assurance Manager, quality control laboratory, department of fisheries, khulna in office time and according to package to the committee set by undersigned.
12. The bill shall be paid after deducted all taxes according to government law of Bangladesh.
13. The supplier should submit 03 (three) copies of bill after supplying the good according to supply-order.
14. For all queries regarding the specification and TDS condition, contract with the Procuring Entity within the pre tender/proposal meeting time frame as per notice, No queries shall be accepted after the proposal meeting time frame.
15. Bill shall be paid after successful installation of all equipment and spares.
16. The Tenderer must submit up to date Trade License, VAT Registration Certificate, NID card and Income Tax Certificate.
17. N/A
18. The bidder must have to mention the brand name, Model and country of origin of the Goods in the bidding process.
19. The tenderer must have to mention the detail technical specification of goods/ equipment’s/ instrument in the bidding process use of the term as per requirement/as per schedule will not be considered.
20. The tenderer shall have to attached the original Product catalogue those will be verify from manufacturer website or via email also tenderer responsibility to verified all document (Manufacturer authorization) within seven days during evaluation time.
|
| TDS/PDS--D. Tender Preparation--
|
Tenders are being invited for [state single lot]
Or
Tenders are being invited for more than one lot [state number of lots on “lot-by-lot” basis]
Or
Tenders are being invited for [state one or more items on an “item-by-item” basis]
[delete as appropriate]
|
Tenders are being invited for single lot
|
| TDS/PDS--D. Tender Preparation--
|
The Tender validity period shall be [sate days] days.
[Note: normally 60 to 120 days; shorter or longer period may be authorized by HOPE or authorized officer to suit the requirements of particular Procurement activity].
|
The Tender validity period shall be 120 days.
[Note: normally 60 to 120 days; shorter or longer period may be authorized by HOPE or authorized officer to suit the requirements of particular Procurement activity].
|
| TDS/PDS--D. Tender Preparation--
|
Tender Security shall not be required
Or
The amount of the Tender Security shall be [ state amount ]
[note: Not exceeding three percent (3%) of the official estimated cost but as a fixed amount]
[delete as appropriate]
|
The amount of the Tender Security shall be 2.54%
[note: Not exceeding three percent (3%) of the official estimated cost but as a fixed amount]
[delete as appropriate]
|
| Field Name |
Old Value |
New Value |
| TDS/PDS--D. Tender Preparation--
|
Tenderer shall submit with its e-Tender the following additional documents:
1. Country of Origin: USA/Uk/Germany
2. Warranty: 02 (Two) years and five years’ service warranty after the date of installation. Warrenty declared by TENDERER and supplier pad.
3. The tenderer shall have to collect and provide Manufacturer declaration of country of origin.
4. Must have to provide Calibration certificate.
5. The tender submitted company required at least 03 (three) years supply experience of laboratory equipment. The attested copy for the prove of mentioned experience should be attached with the tender application.
6. All Quality documents will be checked by visiting manufacturer website or via email.
7. The tender application must be cancelled if any condition of the tender is failed to assure
8. The successful tender applicant shall have to supply the goods within the mentioned time.
9. The bill of goods will be paid in terms of budget allotment.
10. The authority reserves all rights to receive less/more quantity of goods because of less/ more budget allotment.
11. The supplier should supply the goods with own responsibility and costs to the office of the Quality assurance Manager, quality control laboratory, department of fisheries, khulna in office time and according to package to the committee set by undersigned.
12. The bill shall be paid after deducted all taxes according to government law of Bangladesh.
13. The supplier should submit 03 (three) copies of bill after supplying the good according to supply-order.
14. For all queries regarding the specification and TDS condition, contract with the Procuring Entity within the pre tender/proposal meeting time frame as per notice, No queries shall be accepted after the proposal meeting time frame.
15. Bill shall be paid after successful installation of all equipment and spares.
16. The Tenderer must submit up to date Trade License, VAT Registration Certificate, NID card and Income Tax Certificate.
17. N/A
18. The bidder must have to mention the brand name, Model and country of origin of the Goods in the bidding process.
19. The tenderer must have to mention the detail technical specification of goods/ equipment’s/ instrument in the bidding process use of the term as per requirement/as per schedule will not be considered.
20. The tenderer shall have to attached the original Product catalogue those will be verify from manufacturer website or via email also tenderer responsibility to verified all document (Manufacturer authorization) within seven days during evaluation time. |
Tenderer shall submit with its e-Tender the following additional documents:
1. Country of Origin: USA/Uk/Germany or an equivalent
2. Warranty: 02 (Two) years and five years’ service warranty after the date of installation. Warrenty declared by TENDERER and supplier pad.
3. The tenderer shall have to collect and provide Manufacturer declaration of country of origin.
4. Must have to provide Calibration certificate.
5. The tender submitted company required at least 03 (three) years supply experience of laboratory equipment. The attested copy for the prove of mentioned experience should be attached with the tender application.
6. All Quality documents will be checked by visiting manufacturer website or via email.
7. The tender application must be cancelled if any condition of the tender is failed to assure
8. The successful tender applicant shall have to supply the goods within the mentioned time.
9. The bill of goods will be paid in terms of budget allotment.
10. The authority reserves all rights to receive less/more quantity of goods because of less/ more budget allotment.
11. The supplier should supply the goods with own responsibility and costs to the office of the Quality assurance Manager, quality control laboratory, department of fisheries, khulna in office time and according to package to the committee set by undersigned.
12. The bill shall be paid after deducted all taxes according to government law of Bangladesh.
13. The supplier should submit 03 (three) copies of bill after supplying the good according to supply-order.
14. For all queries regarding the specification and TDS condition, contract with the Procuring Entity within the pre tender/proposal meeting time frame as per notice, No queries shall be accepted after the proposal meeting time frame.
15. Bill shall be paid after successful installation of all equipment and spares.
16. The Tenderer must submit up to date Trade License, VAT Registration Certificate, NID card and Income Tax Certificate.
17. N/A
18. The bidder must have to mention the brand name, Model and country of origin of the Goods in the bidding process.
19. The tenderer must have to mention the detail technical specification of goods/ equipment’s/ instrument in the bidding process use of the term as per requirement/as per schedule will not be considered.
20. The tenderer shall have to attached the original Product catalogue those will be verify from manufacturer website or via email also tenderer responsibility to verified all document (Manufacturer authorization) within seven days during evaluation time.
|
| TDS/PDS--D. Tender Preparation--
|
The Tender security at the percentage [state percentage]
[Note: Two percent (2%) of the total value of the items offered in one (1) Tender security.]
|
The Tender security at the percentage [state percentage]
[Note: Two percent (2%) of the total value of the items offered in one (1) Tender security.]
|
| Field Name |
Old Value |
New Value |
| Document last selling date & time
|
18/06/2020 16:00 |
23/06/2020 16:00 |
| Eligibility of Consultant
|
As Per TDS
Also Carefully See
Section No. 2, Sub Section No. 4 Name Of Sub Section (D. Tender Preparation)
Additional Requirement:
A). Comply All Condition (See Tender data sheet).
B). No clarification applicable for evaluation time if any document absent.
C). Country of origin and brand name shall be specify (No as per TDS applicable).
|
As Per TDS
Also Carefully See
Section No. 2, Sub Section No. 4 Name Of Sub Section (D. Tender Preparation)
Additional Requirement:
A). Comply All Condition (See Tender data sheet).
B). No clarification applicable for evaluation time if any document absent.
C). Country of origin and brand name shall be specify (No as per TDS applicable).
|
| Opening Date & Time
|
18/06/2020 16:30 |
23/06/2020 16:30 |
| Meeting End Date & Time
|
18/06/2020 14:45 |
23/06/2020 14:45 |
| Closing Date & Time
|
18/06/2020 16:30 |
23/06/2020 16:30 |
| Brief Description of Goods,Works or Service
|
Procurement of Upper Electrode & lower electrodeWhatman filter Graphite tube Sample cup etc
|
Procurement of Upper Electrode & lower electrodeWhatman filter Graphite tube Sample cup etc
|