View IFT /PQ / REOI / RFP / PPS Notice Details
Ministry : Ministry of Housing and Public Works Division :
Organization : Public Works Department (PWD) Procuring Entity Name : PWD Wood Workshop Division
Procuring Entity Code : Procuring Entity District : Dhaka
Procurement Nature : Works Procurement Type : NCT
Event Type : Invitation for : Tender - Single Lot
Invitation Reference No. : 25.36.2680.534.14.191.21-1901 dt-22/03/2021 Tender/Proposal Status :
App ID : 174571 Tender/Proposal ID : 561140
Key Information and Funding Information :
Procurement Method : Open Tendering Method (OTM) Budget Type : Development
Source of Funds : Government
Particular Information :
Project Code : 40 TTC Project Name : Establishment of 40 (Forty) Technical Training center (TTC) at Upazila Level and 01(one) Institute of Marine Technology (IMT) at Chittagong
Tender/Proposal Package No. and Description : Sandwip G-02
Manufacturing Supplying & fixing furniture at Sandwip Upazila in Chittagong District under project of Establishment of 40 forty Technical training centre TTC at Upazila level and 01 one Institute of Marine Technology IMT at Chittagong Group no-02
Category : Wood, wood products, cork products, basketware and wickerwork;Sawn wood;Railway sleepers;Mining timber;Prepared softwood;Hardwood;Parquet;Prepared or treated wooden products;Sawdust;Wooden sheets and veneers;Wooden boards and panels;Densified wood;Builders wood joinery and carpentry;Builders wood joinery;Builders wood carpentry;Prefabricated wooden buildings;Wooden containers, pallets, boxes and other containers;Wooden containers;Wooden pallets;Articles of wood and cork;Products of wood and related articles;Articles of cork, basketware and wickerwork
Scheduled Tender/Proposal Publication
Date and Time :
23-Mar-2021 08:18 Tender/Proposal Document last selling /
downloading Date and Time :
08-Apr-2021 12:00
Pre - Tender/Proposal meeting Start
Date and Time :
23-Mar-2021 10:32 Pre - Tender/Proposal meeting End
Date and Time :
28-Mar-2021 10:32
Tender/Proposal Closing
Date and Time :
08-Apr-2021 12:10 Tender/Proposal Opening
Date and Time :
08-Apr-2021 12:10
Last Date and Time for Tender/Proposal Security
Submission :
08-Apr-2021 12:05    
Information for Tenderer/Consultant :
Eligibility of Tenderer :

This IFT is open for all eligible Reputed Contractors who have the following eligibility Criteria as mentioned below:

(a). The minimum specific experience as a Prime Contractor or Subcontractor or Management Contractor in construction of similar nature of works, (Wooden & Steel furniture) i.e. any Wooden & Steel furniture manufacture successfully completed within the last five (05) years with a value of at least Tk 45.00 Lac of Government/ Semi-Government/ Autonomous Bodies in Bangladesh. i.e. years counting backward from the date of publication of IFT in the e-GP System.

The above experience/ work completion certificate shall have to be submitted as follows:

In case of the work done under PWD, the certifying and authenticating authority shall be the concerned Executive Engineer.
In case of work done any Govt./Semi-Govt organization other than PWD the certifying authority shall be an officer not below the rank of Executive Engineer and duly verified by the Concerned Executive Engineer of PWD of that district under whose jurisdiction the work has been done.

(b). The required Average Annual Construction Turnover shall be greater than Tk 38.00 Lac for within the last five (03) years.

(c). The minimum amount of liquid assets or working capital or credit facilities shall be Tk 52.00 Lac. Document submitted along with the tender must be issued in between publication date and submission date of the tender.

(d) Up-to-date valid Trade License, Income Tax Clearance Certificate from the NBR with TIN & e-BIN Certificate

(e) Other required eligibility and conditions of the tenderer are shown in TDS & PCC of tender documents.

Brief Description of Works :

Manufacturing Supplying & fixing furniture at Sandwip Upazila in Chittagong District under project of Establishment of 40 forty Technical training centre TTC at Upazila level and 01 one Institute of Marine Technology IMT at Chittagong Group no-02

Evaluation Type : Lot wise
Document Available : Package wise
Document Fees : Package wise
Tender/Proposal Document Price (In BDT) : 2000
Mode of Payment :
Tender/Proposal Security Valid Up to : 04-Aug-2021
Tender/Proposal Valid Up to : 07-Jul-2021
Lot No. Identification of Lot Location Tender/Proposal security
(Amount in BDT)
Tentative Start Date Tentative Completion Date
1 Manufacturing Supplying & fixing furniture at Sandwip Upazila in Chittagong District under project of Establishment of 40 forty Technical training centre TTC at Upazila level and 01 one Institute of Marine Technology IMT at Chittagong Group no-02 Chittagong 200000 18-Apr-2021 19-Jul-2021
Procuring Entity Details:
Name of Official Inviting Tender/Proposal : Md Ayub Ali Designation of Official Inviting Tender/Proposal : Executive Engineer
Address of Official Inviting Tender/Proposal :
Address: PWD Wood Workshop Division ,Sher-E-Bangla Nagar ,Dhaka
City: Dhaka
Thana: Sher -E-Bangla Nagar
District: Dhaka - 1215
Country: Bangladesh
Contact details of Official Inviting Tender/Proposal :
Phone No: 02-55028813
Fax No:
The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs
Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.
Documents
Amendment / Corrigendum Detail
 Amendment / Corrigendum No. :  1 
Amendment / Corrigendum Text :

Corrigendum

Field Name Old Value New Value
Eligibility of Consultant

This IFT is open for all eligible Reputed Contractors who have the following eligibility Criteria as mentioned below:

(a). The minimum specific experience as a Prime Contractor or Subcontractor or Management Contractor in construction of similar nature of works, (Wooden & Steel furniture) i.e. any Wooden & Steel furniture manufacture successfully completed within the last five (05) years with a value of at least Tk 45.00 Lac of Government/ Semi-Government/ Autonomous Bodies in Bangladesh. i.e. years counting backward from the date of publication of IFT in the e-GP System.

The above experience/ work completion certificate shall have to be submitted as follows:

In case of the work done under PWD, the certifying and authenticating authority shall be the concerned Executive Engineer.
In case of work done any Govt./Semi-Govt organization other than PWD the certifying authority shall be an officer not below the rank of Executive Engineer and duly verified by the Concerned Executive Engineer of PWD of that district under whose jurisdiction the work has been done.

(b). The required Average Annual Construction Turnover shall be greater than Tk 38.00 Lac for within the last five (03) years.

(c). The minimum amount of liquid assets or working capital or credit facilities shall be Tk 52.00 Lac. Document submitted along with the tender must be issued in between publication date and submission date of the tender.

(d) Up-to-date valid Trade License, Income Tax Clearance Certificate from the NBR with TIN & e-BIN Certificate

(e) Other required eligibility and conditions of the tenderer are shown in TDS & PCC of tender documents.

This IFT is open for all eligible Reputed Contractors who have the following eligibility Criteria as mentioned below:

(a). The minimum specific experience as a Prime Contractor or Subcontractor or Management Contractor in construction of similar nature of works, (Wooden & Steel furniture) i.e. any Wooden & Steel furniture manufacture successfully completed within the last five (05) years with a value of at least Tk 45.00 Lac of Government/ Semi-Government/ Autonomous Bodies in Bangladesh. i.e. years counting backward from the date of publication of IFT in the e-GP System.

The above experience/ work completion certificate shall have to be submitted as follows:

In case of the work done under PWD, the certifying and authenticating authority shall be the concerned Executive Engineer.
In case of work done any Govt./Semi-Govt organization other than PWD the certifying authority shall be an officer not below the rank of Executive Engineer and duly verified by the Concerned Executive Engineer of PWD of that district under whose jurisdiction the work has been done.

(b). The required Average Annual Construction Turnover shall be greater than Tk 38.00 Lac for within the last five (03) years.

(c). The minimum amount of liquid assets or working capital or credit facilities shall be Tk 52.00 Lac. Document submitted along with the tender must be issued in between publication date and submission date of the tender.

(d) Up-to-date valid Trade License, Income Tax Clearance Certificate from the NBR with TIN & e-BIN Certificate

(e) Other required eligibility and conditions of the tenderer are shown in TDS & PCC of tender documents.

PCC--A. General--

The Procuring Entity is
[Name, address]
 

The Procuring Entity is Executive Engineer, PWD E/M Wood Workshop Division, S. B. Nagar, Dhaka.

PCC--A. General--

The Project Manager is
[Name, address]
 

The Project Manager is Sub-Divisional Engineer, PWD Wood Workshop Sub-Division, Mirpur, Dhaka.

PCC--A. General--

The Site is located at [location] and is defined in drawings No:
[insert numbers]
 

The Site is located at Chittagong.

PCC--A. General--

The Works consist of
[state brief summary]
 

The Works consist of as per BOQ & Notice

PCC--A. General--

Other documents forming part of the Contract are;

[list other documents viz. Site Investigation Reports, relevant correspondences prior to signing of the Contract agreement etc.]
 

Other documents forming part of the Contract are as per notice and pcc.

PCC--A. General--

Possession of the Site to the Contractor shall be given on the following date;

[state date of possession of site]
 

Possession of the Site to the Contractor shall be given on the following date; within 03 (Three) days from the date of signing contract.

PCC--B. Time Control--

The Start Date shall be [insert date ]
[it is the last date when the Contractor shall commence execution of the Works under the Contract]
 

The Start Date shall be as per contract agreement

PCC--B. Time Control--

The Intended Completion Date for the whole of the Works shall be [insert date]
[to be calculated from the start Date]
 


The Intended Completion Date for the whole of the Works shall be as per contract agreement

PCC--B. Time Control--

The Contractor shall submit a Programme for the Works within [insert days] days of signing the Contract.
[usually ten (10) days or may be less]
 

The Contractor shall submit a Programme for the Works within 3 (Three) days of signing the Contract.

PCC--C. Quality Control--

The Defects Liability Period is [state months]
[usually Defect Liability Period is twelve (12) months to cover at least one complete monsoon season].
 

The Defects Liability Period is 12 month

PCC--D. Cost Control--

The following additional events shall also be the Compensation Events:
[list events or state none ]
 

The following additional events shall also be the Compensation Events: n/a

PCC--D. Cost Control--

The proportion of payments to be retained is [insert percent] percent.

The proportion of payments to be retained is 10 percent.

PCC--D. Cost Control--

The amount of Liquidated Damages or in other words Delay Damages is [insert percentage] percent of final Contract price of the uncompleted Works or any part there of it’s per day of delay.
[usually the percent-rate of liquidated damages is set at between 0.05 and 0.10 of ONE (1) percent of final Contract price of the uncompleted Works or any part there of it’s per day of delay]
Guide to application of GCC Sub Clause 28.1 above
[ Liquidated damages is equivalent to an amount to be determined in accordance with the following formula
T LD = VUW x P x n
Where;
T LD = Total amount of Liquidated Damages
VUW = Value of Uncompleted Works (i.e. works not having been completed as of the expiry of the Intended Completion Date plus the works completed after the expiry of the Intended Completion Date). VUW shall be calculated by deducting the value of the completed works under the Contract from the total Contract price.
P = Percent-rate at which the Liquidated Damages shall be imposed for every day of delay of the final Contract price of the uncompleted Works or any part there of.
n = No of days of delay for completion of works under the Contract]
 

The amount of Liquidated Damages or in other words Delay Damages is 10 percent of final Contract price of the uncompleted Works or any part there of it’s per day of delay.
 

PCC--D. Cost Control--

The maximum amount of Liquidated Damages for the uncompleted Works or any part thereof is [insert percentage] percent of the final Contract price of the whole of the Works.
[ usually the total amount of liquidated damages shall not exceed ten (10) percent of the final Contract price for the whole of the Works]
 

The maximum amount of Liquidated Damages for the uncompleted Works or any part there of is 10 percent

PCC--F. Termination--

The percentage to apply to the contract value of the works not completed, representing the Procuring Entity’s additional cost for completing the uncompleted Works, is [state percentage] percent.

[ usually between ten (10) to twenty (20) percent depending on the nature of the Works]
 

The percentage to apply to the contract value of the works not completed, representing the Procuring Entity’s additional cost for completing the uncompleted Works, is 20 percent.

PCC--H. Disputes and Settlement--

The arbitration shall be conducted in the place mentioned below;
[state name of place with location and district ]
 

The arbitration shall be conducted in the place mentioned below; Office of Superintending Engineer, PWD E/M Circle-3. dhaka

Brief Description of Goods,Works or Service

Manufacturing Supplying & fixing furniture at Sandwip Upazila in Chittagong District under project of Establishment of 40 forty Technical training centre TTC at Upazila level and 01 one Institute of Marine Technology IMT at Chittagong Group no-02

Manufacturing Supplying & fixing furniture at Sandwip Upazila in Chittagong District under project of Establishment of 40 forty Technical training centre TTC at Upazila level and 01 one Institute of Marine Technology IMT at Chittagong Group no-02

 
Save As PDF