View IFT /PQ / REOI / RFP / PPS Notice Details

Ministry :	Ministry of Agriculture	Division :
Organization :	Bangladesh Agricultural Development Corporation (BADC)	Procuring Entity Name :	Superintending engineer office, BADC Sech Complex, Chanchra, Jessore
Procuring Entity Code :		Procuring Entity District :	Jashore
Procurement Nature :	Goods	Procurement Type :	NCT
Event Type :	TENDER	Invitation for :	Tender - Single Lot
Invitation Reference No. :	KJMIDP-GD-14-2020-21/04	Tender/Proposal Status :	Contract Awarded
App ID :	168583	Tender/Proposal ID :	565654

Key Information and Funding Information :

Procurement Method :	Open Tendering Method (OTM)	Budget Type :	Development
Source of Funds :	Government

Particular Information :

Project Code :	5-4305-5054	Project Name :	Greater Khulna and Jessore District Minor Irrigation Development Project
Tender/Proposal Package No. and Description :	KJMIDP-GD-14-2020-21/04 Procurement of 250 mm uPVC pipe with fitings for 2 cusec LLP scheme
Category :	Rubber products; Rubber, plastic and film products; Plastic products;Tyres and related products;Unvulcanised and vulcanised rubber articles;Rubberised textile fabrics;Reclaimed rubber;Rubber waste products;Medical articles of rubber;Articles of hard rubber;Plastic plates, sheets, tubes and profiles;Packaging products of plastics;Builders ware of plastic;Miscellaneous plastic products;Magnetic cards;Sound recordings;Resins
Scheduled Tender/Proposal Publication Date and Time :	06-Apr-2021 17:00	Tender/Proposal Document last selling / downloading Date and Time :	25-Apr-2021 17:00
Pre - Tender/Proposal meeting Start Date and Time :	07-Apr-2021 11:00	Pre - Tender/Proposal meeting End Date and Time :	19-Apr-2021 17:00
Tender/Proposal Closing Date and Time :	26-Apr-2021 14:30	Tender/Proposal Opening Date and Time :	26-Apr-2021 14:30
Last Date and Time for Tender/Proposal Security Submission :	25-Apr-2021 17:19

Information for Tenderer/Consultant :

Eligibility of Tenderer :	Eligibility of Tenderer: Only local manufacturer who have industrial license of producing uPVC materials will be allowed to bid this tender. Updated ISO standardization certificate of the Manufacturer must be submitted with the offer. Manufacturer must have industrial Project registration license issued by the Board of investment Government of Bangladesh, 03 (Three) years over all Manufacturer experience certificate of those particular/respective materials enclosed with the offer. The minimum production capacity or availability of equipment is/are: Production capacity of uPVC pipe of the tenderer’s factory must have minimum 400 (Four Hundred) meter per day. The purchaser may send representative to verify the technical and production ability of the manufacturer. The Tenderer will have to bear all cost of factory inspection The test of the sample of uPVC pipe and Fittings of technically & commercially responsive lowest bidder(s) for each lot will be done separately at the laboratory of recognized technical institution as per tender specification and terms-conditions. All costs including handling, carrying & testing will be borne by the supplier. The bidder must pay the test charges to BUET/MIST for each lot before testing. On test, if the sample fails to confirm the tender specification then the offer will be rejected. In that case if Project Director (KJMIDP), BADC desire, sample of 2nd lowest responsive bidder may send for BUET/MIST test and so on. The bidder must send the sample for BUET test within 7 (seven) days of the date of issuing instruction letter. The Manufacturer must be send a set of sample ( 2 meter pipe ,1 nos tee, 1 nos Bend) to the PD office ( KJMIDP) jashore by courier service or physically.
Brief Description of Goods and Related Service :	Procurement of 250 mm uPVC pipe with fitings for Extention 2 cusec LLP scheme
Evaluation Type :	Lot wise
Document Available :	Package wise
Document Fees :	Package wise
Tender/Proposal Document Price (In BDT) :	2000
Mode of Payment :	Payment through Bank
Tender/Proposal Security Valid Up to :	22-Aug-2021
Tender/Proposal Valid Up to :	25-Jul-2021

Lot No.	Identification of Lot	Location	Tender/Proposal security (Amount in BDT)	Tentative Start Date	Tentative Completion Date
04	Procurement of 250 mm uPVC pipe with fitings for 2 cusec LLP scheme	Under Project Area	500000	16-May-2021	30-Jun-2021

Procuring Entity Details:

Name of Official Inviting Tender/Proposal :

Md Abdulla Al Rashid

Designation of Official Inviting Tender/Proposal :

Project Director

Address of Official Inviting Tender/Proposal :

Address	: BADC Sech Complex, Chanchra, Jessore-7400
City	: Jessore
Thana	: Jessore Sadar
District	: Jashore - 7400
Country	: Bangladesh

Contact details of Official Inviting Tender/Proposal :

Phone No	: 0421-66467
Fax No	:

The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs

Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.

Documents

Amendment / Corrigendum No. : 1
Amendment / Corrigendum Text :	The Manufacturer must be send a set of sample courier service or physically.

Field Name	Old Value	New Value
Eligibility of Consultant	Eligibility of Tenderer: Only local manufacturer who have industrial license of producing uPVC materials will be allowed to bid this tender. Updated ISO standardization certificate of the Manufacturer must be submitted with the offer. Manufacturer must have industrial Project registration license issued by the Board of investment Government of Bangladesh, 03 (Three) years over all Manufacturer experience certificate of those particular/respective materials enclosed with the offer. The minimum production capacity or availability of equipment is/are: Production capacity of uPVC pipe of the tenderer’s factory must have minimum 400 (Four Hundred) meter per day. The purchaser may send representative to verify the technical and production ability of the manufacturer. The Tenderer will have to bear all cost of factory inspection The test of the sample of uPVC pipe and Fittings of technically & commercially responsive lowest bidder(s) for each lot will be done separately at the laboratory of recognized technical institution as per tender specification and terms-conditions. All costs including handling, carrying & testing will be borne by the supplier. The bidder must pay the test charges to BUET/MIST for each lot before testing. On test, if the sample fails to confirm the tender specification then the offer will be rejected. In that case if Project Director (KJMIDP), BADC desire, sample of 2nd lowest responsive bidder may send for BUET/MIST test and so on. The bidder must send the sample for BUET test within 7 (seven) days of the date of issuing instruction letter.	Eligibility of Tenderer: Only local manufacturer who have industrial license of producing uPVC materials will be allowed to bid this tender. Updated ISO standardization certificate of the Manufacturer must be submitted with the offer. Manufacturer must have industrial Project registration license issued by the Board of investment Government of Bangladesh, 03 (Three) years over all Manufacturer experience certificate of those particular/respective materials enclosed with the offer. The minimum production capacity or availability of equipment is/are: Production capacity of uPVC pipe of the tenderer’s factory must have minimum 400 (Four Hundred) meter per day. The purchaser may send representative to verify the technical and production ability of the manufacturer. The Tenderer will have to bear all cost of factory inspection The test of the sample of uPVC pipe and Fittings of technically & commercially responsive lowest bidder(s) for each lot will be done separately at the laboratory of recognized technical institution as per tender specification and terms-conditions. All costs including handling, carrying & testing will be borne by the supplier. The bidder must pay the test charges to BUET/MIST for each lot before testing. On test, if the sample fails to confirm the tender specification then the offer will be rejected. In that case if Project Director (KJMIDP), BADC desire, sample of 2nd lowest responsive bidder may send for BUET/MIST test and so on. The bidder must send the sample for BUET test within 7 (seven) days of the date of issuing instruction letter. The Manufacturer must be send a set of sample ( 2 meter pipe ,1 nos tee, 1 nos Bend) to the PD office ( KJMIDP) jashore by courier service or physically.
Brief Description of Goods,Works or Service	Procurement of 250 mm uPVC pipe with fitings for Extention 2 cusec LLP scheme	Procurement of 250 mm uPVC pipe with fitings for Extention 2 cusec LLP scheme

Field Name

Old Value

New Value

Eligibility of Consultant

Eligibility of Tenderer:

Only local manufacturer who have industrial license of producing uPVC materials will be allowed to bid this tender.
Updated ISO standardization certificate of the Manufacturer must be submitted with the offer.
Manufacturer must have industrial Project registration license issued by the Board of investment Government of Bangladesh, 03 (Three) years over all Manufacturer experience certificate of those particular/respective materials enclosed with the offer.
The minimum production capacity or availability of equipment is/are: Production capacity of uPVC pipe of the tenderer’s factory must have minimum 400 (Four Hundred) meter per day. The purchaser may send representative to verify the technical and production ability of the manufacturer. The Tenderer will have to bear all cost of factory inspection
The test of the sample of uPVC pipe and Fittings of technically & commercially responsive lowest bidder(s) for each lot will be done separately at the laboratory of recognized technical institution as per tender specification and terms-conditions. All costs including handling, carrying & testing will be borne by the supplier. The bidder must pay the test charges to BUET/MIST for each lot before testing. On test, if the sample fails to confirm the tender specification then the offer will be rejected. In that case if Project Director (KJMIDP), BADC desire, sample of 2nd lowest responsive bidder may send for BUET/MIST test and so on. The bidder must send the sample for BUET test within 7 (seven) days of the date of issuing instruction letter.

Eligibility of Tenderer:

Only local manufacturer who have industrial license of producing uPVC materials will be allowed to bid this tender.
Updated ISO standardization certificate of the Manufacturer must be submitted with the offer.
Manufacturer must have industrial Project registration license issued by the Board of investment Government of Bangladesh, 03 (Three) years over all Manufacturer experience certificate of those particular/respective materials enclosed with the offer.
The minimum production capacity or availability of equipment is/are: Production capacity of uPVC pipe of the tenderer’s factory must have minimum 400 (Four Hundred) meter per day. The purchaser may send representative to verify the technical and production ability of the manufacturer. The Tenderer will have to bear all cost of factory inspection
The test of the sample of uPVC pipe and Fittings of technically & commercially responsive lowest bidder(s) for each lot will be done separately at the laboratory of recognized technical institution as per tender specification and terms-conditions. All costs including handling, carrying & testing will be borne by the supplier. The bidder must pay the test charges to BUET/MIST for each lot before testing. On test, if the sample fails to confirm the tender specification then the offer will be rejected. In that case if Project Director (KJMIDP), BADC desire, sample of 2nd lowest responsive bidder may send for BUET/MIST test and so on. The bidder must send the sample for BUET test within 7 (seven) days of the date of issuing instruction letter.
The Manufacturer must be send a set of sample ( 2 meter pipe ,1 nos tee, 1 nos Bend) to the PD office ( KJMIDP) jashore by courier service or physically.

Brief Description of Goods,Works or Service

Procurement of 250 mm uPVC pipe with fitings for Extention 2 cusec LLP scheme

Save As PDF