View IFT /PQ / REOI / RFP / PPS Notice Details
Ministry : Ministry of Education Division : Secondary and Higher Education Division
Organization : National Curriculum and textbook Board (NCTB) Procuring Entity Name : Member (Textbook), NCTB
Procuring Entity Code : Procuring Entity District : Dhaka
Procurement Nature : Goods Procurement Type : NCT
Event Type : Invitation for : Tender - Single Lot
Invitation Reference No. : 37.06.0000.303.07.006.22.1895 Tender/Proposal Status :
App ID : 183874 Tender/Proposal ID : 721592
Key Information and Funding Information :
Procurement Method : Open Tendering Method (OTM) Budget Type : Revenue
Source of Funds : Government
Particular Information :
Project Code : Not applicable Project Name : Not applicable
Tender/Proposal Package No. and Description : GD.182.SEC_7.150
For Printing Binding and Supplying textbooks of Ebtadie 1-2 , Secondary, Dakhil 6-7, Technical Trade book and teachers Guide to be distributed for the Academic Year 2023
Category : Various types of printed matter and articles for printing; Printing, publishing and related services;Printed books, brochures and leaflets;Printed books;Publications;Directories;Leaflets;Brochures;Booklets;Newspapers, journals, periodicals and magazines;Newspapers;Postcards, greeting cards and other printed matter;Postcards;Greeting cards;Stamps, cheque forms, banknotes, stock certificates, trade advertising material, catalogues and manuals;Stamps;Stamp-impressed paper;Banknotes;Cheque forms;Security-type printed matter;Trade-advertising material, commercial catalogues and manuals;Manuals;Printing plates or cylinders or other media for use in printing;Offset plates;Dry-etching equipment;Paper or paperboard registers, account books, binders, forms and other articles of printed stationery;Paper or paperboard registers;Forms;Exercise books;Albums for samples;Binders and related accessories;Printed stationery except forms;Miscellaneous printed matter;Car-tax discs;Driving licences;ID cards;Permits;Entrance cards;Bespoke printed matter;Tickets;Printing services;Printing services for books;Printing services for stationery;Printing services for security printed matter;Printing services for forms;Printing services for tickets;Printing services for calendars;Printing services for timetables;Newspaper printing services;Printing services for posters;Services related to printing;Print finishing services;Composition services;Printing and delivery services;Printing and distribution services;Publishing services;Bookbinding and finishing services;Subscription services
Scheduled Tender/Proposal Publication
Date and Time :
03-Aug-2022 17:00 Tender/Proposal Document last selling /
downloading Date and Time :
24-Aug-2022 17:00
Pre - Tender/Proposal meeting Start
Date and Time :
04-Aug-2022 09:00 Pre - Tender/Proposal meeting End
Date and Time :
16-Aug-2022 17:00
Tender/Proposal Closing
Date and Time :
25-Aug-2022 18:00 Tender/Proposal Opening
Date and Time :
25-Aug-2022 18:00
Last Date and Time for Tender/Proposal Security
Submission :
25-Aug-2022 12:00    
Information for Tenderer/Consultant :
Eligibility of Tenderer :

As Per TDS
 

Brief Description of Goods and Related Service :

For Printing Binding and Supplying textbooks of Ebtadie 1-2 , Secondary, Dakhil 6-7, Technical Trade book and teachers Guide to be distributed for the Academic Year 2023 

Evaluation Type : Lot wise
Document Available : Package wise
Document Fees : Package wise
Tender/Proposal Document Price (In BDT) : 2000
Mode of Payment :
Tender/Proposal Security Valid Up to : 20-Jan-2023
Tender/Proposal Valid Up to : 23-Dec-2022
Lot No. Identification of Lot Location Tender/Proposal security
(Amount in BDT)
Tentative Start Date Tentative Completion Date
150 For Printing Binding and Supplying textbooks of Ebtadie 1-2 , Secondary, Dakhil 6-7, Technical Trade book and teachers Guide to be distributed for the Academic Year 2023 As per delivery schedule 1500000 16-Oct-2022 06-Dec-2022
Procuring Entity Details:
Name of Official Inviting Tender/Proposal : Prof. Dr. AKM Reazul Hassan Designation of Official Inviting Tender/Proposal : Member (Textbook)
Address of Official Inviting Tender/Proposal :
Address: 69-70, Motijheel, C/A, Dhaka-1000
City: Dhaka
Thana: Motijheel
District: Dhaka - 1000
Country: Bangladesh
Contact details of Official Inviting Tender/Proposal :
Phone No: 02-9550805
Fax No:
The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs
Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.
Documents
Amendment / Corrigendum Detail
 Amendment / Corrigendum No. :  1 
Amendment / Corrigendum Text :

Updated Documents.

Field Name Old Value New Value
Eligibility of Consultant

As Per TDS
 

As Per TDS
 

PCC--.--

The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section.
Both side four color cover printing shall be done for all textbook.
All four color books contents page will be 80 GSM as specified in in technical specification [section 7]
Within first 30 days of the total contract days supplier must deliver 50% of the total deliverable of the contract products and therest 50% of the contract products shall be delivered with in next 20 days.
If supplier fails to deliver first 50% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. In such case PE has the right to terminate the contract.
If a supplier is awarded for multiple tenders, supplier must comply each tender delivery schedule individually. If supplies daily production is not satisfactory within the contract period. PE has the right to terminate the contract immediately. For this type of non-performing activity PE has the right to forfeit the PG

Both Content Paper (80 GSM/70 GSM) and Art Card (230 GSM) will be supplied by the Supplier.

The Scope of Supply shall be defined in e-PG3-3A, e-PG3-3B and Drawings Section.
Both side four color cover printing shall be done for all textbook.
All four color books contents page will be 70 GSM as specified in in technical specification [section 7]
Within first 30 days of the total contract days supplier must deliver 50% of the total deliverable of the contract products and therest 50% of the contract products shall be delivered with in next 20 days.
If supplier fails to deliver first 50% within specified scheduled time, it will be treated as undelivered goods and Liquidated Damages will be applicable. In such case PE has the right to terminate the contract.
If a supplier is awarded for multiple tenders, supplier must comply each tender delivery schedule individually. If supplies daily production is not satisfactory within the contract period. PE has the right to terminate the contract immediately. For this type of non-performing activity PE has the right to forfeit the PG

Both Content Paper (80 GSM/70 GSM) and Art Card (230 GSM) will be supplied by the Supplier.

 

 

 


 

National Curriculum and Textbook Board


 

Textbook Delivery Schedule for the Academic Year 2023




 

Package No: GD.182.SEC_7.150, Tender ID: 721592

 





Upazila/Thana Secondary Education Office Digital Technology (Class Seven) History and Social Science (Work book) (Class Seven) Science (Work Book) (Class Seven) Well Being (Class Seven) Arts and Culture (Class Seven) Life and livelihood (Class Seven) Total
 
1
2
3
4
5
6
 
Level
[Version]
Secondary
[Bangla]
Secondary
[Bangla]
Secondary
[Bangla]
Secondary
[Bangla]
Secondary
[Bangla]
Secondary
[Bangla]
 
Manirampur, Jessore 6750 6750 6750 6750 6750 6750 40,500
Keshabpur, Jessore 3900 3900 3900 3900 3900 3900 23,400
Abhaynagar, Jessore 5350 5350 5350 5350 5350 5350 32,100
Chougachha, Jessore 4318 4318 4318 4318 4318 4318 25,908
Jhikargacha, Jessore 4900 4900 4900 4900 4900 4900 29,400
Sharsha, Jessore 5450 5450 5450 5450 5450 5450 32,700
Jessore sadar, Jessore 14500 14500 14500 14500 14500 14500 87,000
Bagherpara, Jessore 3143 3143 3143 3143 3143 3143 18,858
Debhata, Satkhira 1800 1800 1800 1800 1800 1800 10,800
Tala, Satkhira 5200 5200 5200 5200 5200 5200 31,200
Kaliganj, Satkhira 3850 3850 3850 3850 3850 3850 23,100
Assasuni, Satkhira 5400 5400 5400 5400 5400 5400 32,400
Shyamnagar, Satkhira 6100 6100 6100 6100 6100 6100 36,600
Kalaroa, Satkhira 4300 4300 4300 4300 4300 4300 25,800
Satkhira sadar, Satkhira 7100 7100 7100 7100 7100 7100 42,600
Koyra, Khulna 2400 2400 2400 2400 2400 2400 14,400
Paikgasa, Khulna 4500 4500 4500 4500 4500 4500 27,000
Dakop, Khulna 2600 2600 2600 2600 2600 2600 15,600
Botiaghata, Khulna 2393 2393 2393 2393 2393 2393 14,358
Rupsha, Khulna 2833 2833 2833 2833 2833 2833 16,998
Terokhada, Khulna 1958 1958 1958 1958 1958 1958 11,748
Digholia, Khulna 1650 1650 1650 1650 1650 1650 9,900
Dumuria, Khulna 4900 4900 4900 4900 4900 4900 29,400
Fultola, Khulna 2300 2300 2300 2300 2300 2300 13,800
Khan Jahan Ali, Khulna 5400 5400 5400 5400 5400 5400 32,400
Kotwali, Khulna 9000 9000 9000 9000 9000 9000 54,000
Rampal, Bagerhat 2390 2390 2390 2390 2390 2390 14,340
Sarankhola, Bagerhat 2020 2020 2020 2020 2020 2020 12,120
Mongla, Bagerhat 2000 2000 2000 2000 2000 2000 12,000
Mollahat, Bagerhat 2950 2950 2950 2950 2950 2950 17,700
Fakirhat, Bagerhat 2450 2450 2450 2450 2450 2450 14,700
Chitalmari, Bagerhat 2695 2695 2695 2695 2695 2695 16,170
Kachua, Bagerhat 1100 1100 1100 1100 1100 1100 6,600
Bagerhat sadar, Bagerhat 4500 4500 4500 4500 4500 4500 27,000
Morrelganj, Bagerhat 4818 4818 4818 4818 4818 4818 28,908
Total Books 1,46,918 1,46,918 1,46,918 1,46,918 1,46,918 1,46,918 8,81,508
Forma/Book 20.75 22 27.5 21.5 18.25 24.5  
Total Forma 30,48,548.5 32,32,196 40,40,245 31,58,737 26,81,253.5 35,99,491 1,97,60,471

 

 

 

TDS/PDS--C. Qualification Criteria--

The minimum of years of general experience of the Tenderer in the supply of Goods and related services as Supplier shall be 01 (one) years.
[Years counting backward from the date of publication of IFT in the newspaper.]
For each tender, tenderer must individually have the minimum specific experience as Supplier in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed participating any tender within the last 05 (five) years, each with a value of at least Tk. 22400000
 

[Years counting backward from the date of publication of IFT in the newspaper.]
For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) certificate with chalan payment certificate for that amount mentioned in experience certificate. Last experience certificate from NCTB must be submitted.
ii) In case of NCTB related Experience Certificate: VAT or Income Tax certificate/chalan submission is not required.

iii) In case of NCTB related Last Specific Experience Certificate submission: NoA Copy is acceptable, NCTB will verify NoA/Experience Certificate whether the contract was successfully completed or not. If not it will not be considered as valid Specific Experience Certificate.

iv) In case of experience of other Govt. /Non. Govt. organization tenderer must submit valid VAT (if applicable) and Income Tax Certificate against the submitted Specific Experience Certificate.
If a tenderer is responsive for more than one tender under this HOPE, then tenderer must comply individual specific experience certificate for each tender. In this case if less specific experience found TEC will consider as non-responsive for insufficient specific experience.

The minimum supply and/or production capacity of Goods is/ are:
1. The Tenderer must have own sufficient machineries for Cover and Text printing, machineries
for perfect/Auto/Glue binding and UV laminating machine to execute the contract. No contractual printing machines will be considered.
2. A Printing Unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 1000 sqft. Multiple Printing Units are acceptable considering the mentioned criteria. Minimum one bi-color or higher and one UV machine is allowed for multiple lots or units. Address of all Printing Units must be mentioned in the tender and the printing and binding works must be done in that/those premises. Within the contract period Supplier/Manufacturer must not use this place for any other printing works.

3. Physical facilities of the Tenderer shall be inspected by the TEC or NCTB's inspection Committee. At post evaluation, tenderer must have to show each printing/binding machine running accordingly with a sample printing and binding. Number of tenders to be awarded as per the capacity of the Tenderers.
4. Last performance report of the tenderer will be prepared by NCTB and it will be supplied to TEC. TEC will consider the performance report at the time of tender evaluation. Subject to satisfaction TEC has right to consider as Non-responsive or reduce the production capacity of particular tenderer.
5. The minimum production capacity of printing and Auto binding machine of textbook shall be 100% in quantity of goods of proposed contract within 50 (Fifty) days and it will be verified before final evaluation. Production Capacity of the Machinery is mentioned below. Printing and Binding Capacity Determination:
a. For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the hope of NCTB. At the time of tender evaluation occupied machines (by the concern TEC) shall not be considered for another tender under the hope of NCTB. Unoccupied production capacity will be supplied to TEC by PE under same HOPE for tender evaluation.
b. Production Capacity of Machinery which may be disrupted by power (electricity) outage/shortage. The Production Capacity (including cover and text part) of the Machinery per day: (i) Web Machine [only 20”x 30” machine size will be considered] will be considered 400 Ream per day (ii) Sheet Machine 70 Ream per day, Four Color Sheet Machine 80 Ream per day.
c. Binding Capacity of Machine depends on clam which may also be disrupted by power (electricity) outage/shortage. The Binding Machine of single clam should have capacity of binding 2500 Books per day. A Tenderer without having adequate capacity for printing and binding will not be considered as qualified.
d. Printing Machine attached with UV lamination machine will not be considered for capacity calculation.
N.B : Joint Venture (JV) is not allowed.

The minimum of years of general experience of the Tenderer in the supply of Goods and related services as Supplier shall be 01 (one) years.
[Years counting backward from the date of publication of IFT in the newspaper.]
For each tender, tenderer must individually have the minimum specific experience as Supplier in supply of similar Goods [Printing, Binding & Supplying of Books] of at least 02 (two) contracts successfully completed participating any tender within the last 05 (five) years, each with a value of at least Tk. 23000000

 

[Years counting backward from the date of publication of IFT in the newspaper.]
For the proof of valid experience certificate tenderer must submit the following documents:
i) Tenderer must provide VAT (if applicable) and Income Tax (IT) certificate with chalan payment certificate for that amount mentioned in experience certificate. Last experience certificate from NCTB must be submitted.
ii) In case of NCTB related Experience Certificate: VAT or Income Tax certificate/chalan submission is not required.

iii) In case of NCTB related Last Specific Experience Certificate submission: NoA Copy is acceptable, NCTB will verify NoA/Experience Certificate whether the contract was successfully completed or not. If not it will not be considered as valid Specific Experience Certificate.

iv) In case of experience of other Govt. /Non. Govt. organization tenderer must submit valid VAT (if applicable) and Income Tax Certificate against the submitted Specific Experience Certificate.
If a tenderer is responsive for more than one tender under this HOPE, then tenderer must comply individual specific experience certificate for each tender. In this case if less specific experience found TEC will consider as non-responsive for insufficient specific experience.

The minimum supply and/or production capacity of Goods is/ are:
1. The Tenderer must have own sufficient machineries for Cover and Text printing, machineries
for perfect/Auto/Glue binding and UV laminating machine to execute the contract. No contractual printing machines will be considered.
2. A Printing Unit shall have a set of printing machineries along with all equipment (binding, UV lamination, cutting, bundling, etc machines) to furnish a set of complete books in the same premises of minimum 1000 sqft. Multiple Printing Units are acceptable considering the mentioned criteria. Minimum one bi-color or higher and one UV machine is allowed for multiple lots or units. Address of all Printing Units must be mentioned in the tender and the printing and binding works must be done in that/those premises. Within the contract period Supplier/Manufacturer must not use this place for any other printing works.

3. Physical facilities of the Tenderer shall be inspected by the TEC or NCTB's inspection Committee. At post evaluation, tenderer must have to show each printing/binding machine running accordingly with a sample printing and binding. Number of tenders to be awarded as per the capacity of the Tenderers.
4. Last performance report of the tenderer will be prepared by NCTB and it will be supplied to TEC. TEC will consider the performance report at the time of tender evaluation. Subject to satisfaction TEC has right to consider as Non-responsive or reduce the production capacity of particular tenderer.
5. The minimum production capacity of printing and Auto binding machine of textbook shall be 100% in quantity of goods of proposed contract within 50 (Fifty) days and it will be verified before final evaluation. Production Capacity of the Machinery is mentioned below. Printing and Binding Capacity Determination:
a. For smooth production (printing, binding and supplying activities) in primary and secondary level textbooks, the production capacity of the machineries of the tenderer shall be aggregately calculated by the concern TEC under the hope of NCTB. At the time of tender evaluation occupied machines (by the concern TEC) shall not be considered for another tender under the hope of NCTB. Unoccupied production capacity will be supplied to TEC by PE under same HOPE for tender evaluation.
b. Production Capacity of Machinery which may be disrupted by power (electricity) outage/shortage. The Production Capacity (including cover and text part) of the Machinery per day: (i) Web Machine [only 20”x 30” machine size will be considered] will be considered 400 Ream per day (ii) Sheet Machine 70 Ream per day, Four Color Sheet Machine 80 Ream per day.
c. Binding Capacity of Machine depends on clam which may also be disrupted by power (electricity) outage/shortage. The Binding Machine of single clam should have capacity of binding 2500 Books per day. A Tenderer without having adequate capacity for printing and binding will not be considered as qualified.
d. Printing Machine attached with UV lamination machine will not be considered for capacity calculation.
N.B : Joint Venture (JV) is not allowed.

TDS/PDS--C. Qualification Criteria--

The minimum amount of liquid assets i.e. working capital or credit line(s), net of other contractual commitments is Tk. 27300000
 

The minimum amount of liquid assets i.e. working capital or credit line(s), net of other contractual commitments is Tk. 28100000

 

Brief Description of Goods,Works or Service

For Printing Binding and Supplying textbooks of Ebtadie 1-2 , Secondary, Dakhil 6-7, Technical Trade book and teachers Guide to be distributed for the Academic Year 2023 

For Printing Binding and Supplying textbooks of Ebtadie 1-2 , Secondary, Dakhil 6-7, Technical Trade book and teachers Guide to be distributed for the Academic Year 2023 

Tender/Proposal Security (Amount in BDT)(Lot No : 150) 1400000.0 1500000
 
Save As PDF