View IFT /PQ / REOI / RFP / PPS Notice Details

Ministry :	Ministry of Agriculture	Division :
Organization :	Barind Multipurpose Development Authority (BMDA)	Procuring Entity Name :	EIECD, BMDA, Head Office, Rajshahi
Procuring Entity Code :		Procuring Entity District :	Rajshahi
Procurement Nature :	Goods	Procurement Type :	NCT
Event Type :	TENDER	Invitation for :	Tender - Single Lot
Invitation Reference No. :	BMDA/EIECD/HQ/uPVC (Goods)-427/22-23 dt.5/12/22	Tender/Proposal Status :	Contract Awarded
App ID :	187904	Tender/Proposal ID :	761892

Key Information and Funding Information :

Procurement Method :	Open Tendering Method (OTM)	Budget Type :	Development
Source of Funds :	Government

Particular Information :

Project Code :	224361300	Project Name :	Enhancement of Command Area and Irrigation efficiency through extension of subsurface Irrigation Channel and piloting of Drip Irrigation System
Tender/Proposal Package No. and Description :	EIECD-uPVC Pipe-Chapai-13 Supply of 250mm outer dia uPVC pipe and moulded fittings.
Category :	Rubber, plastic and film products; Rubber products; Tyres and related products; Unvulcanised and vulcanised rubber articles; Rubberised textile fabrics; Reclaimed rubber; Rubber waste products; Medical articles of rubber; Articles of hard rubber; Plastic products; Film products;Plastic plates, sheets, tubes and profiles;Packaging products of plastics;Builders ware of plastic;Miscellaneous plastic products;Magnetic cards;Sound recordings;Resins;Radiology film;Cinematographic film;Video films
Scheduled Tender/Proposal Publication Date and Time :	05-Dec-2022 16:00	Tender/Proposal Document last selling / downloading Date and Time :	21-Dec-2022 16:00
Pre - Tender/Proposal meeting Start Date and Time :	06-Dec-2022 11:00	Pre - Tender/Proposal meeting End Date and Time :	06-Dec-2022 13:00
Tender/Proposal Closing Date and Time :	26-Dec-2022 14:40	Tender/Proposal Opening Date and Time :	26-Dec-2022 14:40
Last Date and Time for Tender/Proposal Security Submission :	26-Dec-2022 11:00

Information for Tenderer/Consultant :

Eligibility of Tenderer :	a) Local manufacturer who have industrial license, environmental clearance certificate from the Directorate of Environment (DoE), Ten years over all production and 5 (Five) years specific experience in supplying 250 mm dia uPVC pipe and moulded fittings in any Govt./ Semi Govt./ Autonomous organization. (Details describes in TDS) b) Factory test report have to be submitted with the supplied goods. c) Tenderer shall submit the sample for each item (i.e. 1m uPVC pipe, T-joint 1 piece, air vent pipe -1 piece (3.3 meter), End cap 1 piece) in Rajshahi regional store before submission of tender and receipt of the depositing shall have to be attached with the Tender document d) Production capacity with detailed analysis has to be submitted with the tender documents. Considering the production capacity, TEC will determine the number of lots which would be awarded to the bidder if more than one lots become responsive and evaluated lowest. e) Tenderer who fulfill the qualifications criteria stipulated in the TDS, PCC, other conditions of the tender documents and having updated valid trade license, VAT, TIN etc. ***All other terms and conditions as mentioned in the tender document (Section 2 & 4) should be fulfilled by tenderer.
Brief Description of Goods and Related Service :	1. Supply of 250mm outer dia uPVC pipes SDR-65 2. Supply of 250mm inner dia moulded T-joint 3. Supply of 250mm inner dia moulded Air vant each legnth 3.3 meter 4. Supply of 250mm inner dia moulded End cap (Female part match with pipe).
Evaluation Type :	Lot wise
Document Available :	Package wise
Document Fees :	Package wise
Tender/Proposal Document Price (In BDT) :	2000
Mode of Payment :	Payment through Bank
Tender/Proposal Security Valid Up to :	23-May-2023
Tender/Proposal Valid Up to :	25-Apr-2023

Lot No.	Identification of Lot	Location	Tender/Proposal security (Amount in BDT)	Tentative Start Date	Tentative Completion Date
Chapai-13	Supply of 250mm outer dia uPVC pipe and moulded fittings.	Project area	375000	01-Mar-2023	16-Mar-2023

Procuring Entity Details:

Name of Official Inviting Tender/Proposal :

Md. Shahidur Rahman, Project Director, EIECDP, BMDA, Rajshahi

Designation of Official Inviting Tender/Proposal :

Project Director

Address of Official Inviting Tender/Proposal :

Address	: EIECD Project, BMDA, Head Office, Rajshahi.
City	: Rajshahi
Thana	: Rajpara
District	: Rajshahi - 6000
Country	: Bangladesh

Contact details of Official Inviting Tender/Proposal :

Phone No	: 02-588862618
Fax No	:

The procuring entity reserves the right to accept or reject all Tenders/Proposals / Pre-Qualifications / EOIs

Note: Bank will update the payment transactions only at the end of the day, so the tenderers should make sure the securities and other payments are made at least one day before the submission date.

Documents

Amendment / Corrigendum No. : 1
Amendment / Corrigendum Text :	openning time extention

Field Name	Old Value	New Value
Eligibility of Consultant	a) Local manufacturer who have industrial license, environmental clearance certificate from the Directorate of Environment (DoE), Ten years over all production and 5 (Five) years specific experience in supplying 250 mm dia uPVC pipe and moulded fittings in any Govt./ Semi Govt./ Autonomous organization. (Details describes in TDS) b) Factory test report have to be submitted with the supplied goods. c) Tenderer shall submit the sample for each item (i.e. 1m uPVC pipe, T-joint 1 piece, air vent pipe -1 piece (3.3 meter), End cap 1 piece) in Rajshahi regional store before submission of tender and receipt of the depositing shall have to be attached with the Tender document d) Production capacity with detailed analysis has to be submitted with the tender documents. Considering the production capacity, TEC will determine the number of lots which would be awarded to the bidder if more than one lots become responsive and evaluated lowest. e) Tenderer who fulfill the qualifications criteria stipulated in the TDS, PCC, other conditions of the tender documents and having updated valid trade license, VAT, TIN etc. ***All other terms and conditions as mentioned in the tender document (Section 2 & 4) should be fulfilled by tenderer.	a) Local manufacturer who have industrial license, environmental clearance certificate from the Directorate of Environment (DoE), Ten years over all production and 5 (Five) years specific experience in supplying 250 mm dia uPVC pipe and moulded fittings in any Govt./ Semi Govt./ Autonomous organization. (Details describes in TDS) b) Factory test report have to be submitted with the supplied goods. c) Tenderer shall submit the sample for each item (i.e. 1m uPVC pipe, T-joint 1 piece, air vent pipe -1 piece (3.3 meter), End cap 1 piece) in Rajshahi regional store before submission of tender and receipt of the depositing shall have to be attached with the Tender document d) Production capacity with detailed analysis has to be submitted with the tender documents. Considering the production capacity, TEC will determine the number of lots which would be awarded to the bidder if more than one lots become responsive and evaluated lowest. e) Tenderer who fulfill the qualifications criteria stipulated in the TDS, PCC, other conditions of the tender documents and having updated valid trade license, VAT, TIN etc. ***All other terms and conditions as mentioned in the tender document (Section 2 & 4) should be fulfilled by tenderer.
Opening Date & Time	22/12/2022 14:00	26/12/2022 14:40
Last date & time for Tender/Proposal Security Submission	21/12/2022 16:00	26/12/2022 11:00
Closing Date & Time	22/12/2022 14:00	26/12/2022 14:40
Brief Description of Goods,Works or Service	1. Supply of 250mm outer dia uPVC pipes SDR-65 2. Supply of 250mm inner dia moulded T-joint 3. Supply of 250mm inner dia moulded Air vant each legnth 3.3 meter 4. Supply of 250mm inner dia moulded End cap (Female part match with pipe).	1. Supply of 250mm outer dia uPVC pipes SDR-65 2. Supply of 250mm inner dia moulded T-joint 3. Supply of 250mm inner dia moulded Air vant each legnth 3.3 meter 4. Supply of 250mm inner dia moulded End cap (Female part match with pipe).

Save As PDF